Vehicle Anti Theft System Reset Override Technique-GMC Sierra or Silverado

After replacing the steering column in the truck it was necessary to replace the Vehicle Anti Theft System Reset Override because it would only start for a couple seconds and then die. I was initially going to try to bypass it, however, a quick call to the chevy dealer (thank you!) revealed a simple sequence of operations on how to reset it. The trick is to turn the key to the "ON" position, leave it for 1 hour like this, then start it up. You must ensure you have a nice fresh battery in order to do this or even place a battery charger on your battery will you do it so it won't go dead. It should fire right up.

Zento Deals 2 Pack Security Tire Clamp Heavy Duty Anti- Theft Vehicle Wheel Lock: https://amzn.to/3fZZptf

so I put a new steering column in the truck here's what's happening start run for a minute and that's it so what's happening is the alarm here anti-theft right that light right there is coming on that tells me because I put this new steering column in and that the ignition switch on the ignition has been has been messed with so now the vehicle thinks it's getting ripped off so what I'm gonna do is attempt to bypass that so I can start this thing off it's a whole new steering column so I have to be able to do that and I don't want to take it to the dealer so I'm gonna try this first the trick the trick to I was looking at bypassing if I had clipping some wires I didn't want him but so the trick here is what I did was I just turned it to the on position and left it for an hour right so you got to have a fresh battery or fresh charge on your battery but you can hear my truck just started up right now so turn it on left it there in the on position with all the lights on for an hour

visit my website: https://www.diy-technician.com

Видео Vehicle Anti Theft System Reset Override Technique-GMC Sierra or Silverado канала DIYTechnician