Review Nixie Clock Arduino SHIELD IN-12 IN-14 Tubes GPS Sync (With adapter is comp. Raspberry Pi)

Buy Now NEW Nixie Arduino SHIELD NCS314 With Sockets:
Official store: https://gra-afch.com/product-category/shield-nixie-clock-for-arduino/
eBay Store https://www.ebay.com/itm/163285428456?
Official store IN-14 DIY KIT: https://gra-afch.com/catalog/diy-kit-for-nixie-tubes-clocks/diy-kit-for-shield-nixie-tubes-clocks-in-14-ncs314/
NEW NEW Official store Wooden Stand https://gra-afch.com/catalog/nixie-tubes-clocks/nixie-tubes-clock-arduino-shield-ncs314-for-in-14-nixie-tubes-on-a-wooden-stand/
Beautiful Acrylic Case at a price of $ 34.95 https://gra-afch.com/catalog/other-components/acrylic-case-nixie-tubes-clocks-arduino-shield-ncs314-in-14/
eBay Store IN-14 http://www.ebay.com/itm/162546389119
eBay Store IN-14 KIT DIY: http://www.ebay.com/itm/162429773904
Buy NOW SHIELD NCS12 (IN-12) & NCS314 (IN-14):
(With adapter is compatible with Raspberry Pi) https://gra-afch.com/product-category/hat-for-raspberry-pi/

The Ardrduino Nixie Tubes Shiled NCS314 allow You to make 6 digits Nixie Tubes Clock in “Divergence Meter Mini” style (by GRA & AFCH). Or You can just display any 6 digits strings on this IN-14 Nixie Tubes made in xUSSR. Hundreds of thousands of Arduino Boards are already fueling people’s creativity all over the world, everyday.

PCB design, schematic, housing and software made by GRA & AFCH.

Nixie Clock Shield NCS314 compatible with Arduino Uno and Mega, so it allows you to write your own unique programs on the Arduino platform, the latest sources are always available on github.com/afch/NixeTubesShieldNCS314/.
Our Benefits:
Easy to build beautiful clock – we offer housing
Easy to customize firmware under Your own needs, thanks to an open platform – Arduino.
Fast uploading via USB
The latest version of the firmware always available on GitHub
No need to download drivers – we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux.
Human friendly menu
Very high qualty of Printed Circuit Boards
Japan alluminium capacitors
Power-On Self-Test
Technical support

Software Features:
Shiled support 6 IN-14 Nixie tubes [hh:mm:ss]
Full static display mode
Slote Machine (Ani poisoning)
Temperature display (DS18B20) [Celsius or Fahrenheit]
GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included)
Operation via IR remote control (Remote control Sony RM-X151, not included)
No need refresh or update information on the tubes
The maximum possible brightness of the tubes
12/24 hour format.
Date format: DD:MM:YY
Unique RGB LEDs backlight with 16,7 million colors.
Very easy to switch LEDS off/on.
As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you).
Easy updating firmware via USB using Arduino IDE.
Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test.
Hardware Features:
Integrated High Voltage Power supply: 150 – 220V.
3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual).
Test points for testing, adjusting and controlling low and high voltage circuits.
Internal buzzer.
RTC (Real Time Clock) with Backup battery
3 buttons on board to control
Potenciometer to adjust High Voltage
IR reciver TSOP4836 for IR remote controllers (may conflict with “Tone” library)
Temperature sensor DS18B20
8 pcs of RGB SMD LEDs
Places for 2 column with 2 neon dots inside
Separate controls upper and lower dots.
Power consumption: 11-14V, 760mA. Recommended: 12V, 1-2A (center pin positive +)
Reverse polarity protection
Nixie Tubes Shiled NCS314 PCB size: 200mm x 53.34mm. (7.87 x 1.2 in)
Downloads

Firmware Shield Board NCS314 (Shield for NIXIE CLOCKS) gra-afch.com/downloads/firmware/firmware-for-board-without-cases/shield-board-ncs314-v1-0-1-2-shield-for-nixie-clocks/
Drivers USB for PC gra-afch.com/category/downloads/drivers/
Schemes Shield Board NCS314 (Shield for NIXIE CLOCKS) gra-afch.com/downloads/schemes/shields/shield-board-ncs314-shield-for-nixie-clocks-2/
Manual (Universal Manual for NIXIE Tubes Clocks) gra-afch.com/downloads/manuals/user-manuals-for-nixie-tubes-clocks/
3D model in STEP format Shield Board NCS314 (Shield for NIXIE CLOCKS) gra-afch.com/downloads/drawings/shield-board-ncs314-shield-for-nixie-clocks/

Видео Review Nixie Clock Arduino SHIELD IN-12 IN-14 Tubes GPS Sync (With adapter is comp. Raspberry Pi) канала GRA & AFCH