Easy How To Bleed Brake Master Cylinder On The Car No bench bleeding..

Easy how to Bleed Brake Master Cylinder On Car. No Bench Bleeding needed.
The vehicle used in the video is a 2004 Toyota Corolla. When applying the brakes the pedal would drop to the floor. The brake master cylinder is a common problem with the Toyota Corolla .Replacing the brake master cylinder did solve the problem. I did bleed the entire brake system after replacing the brake master cylinder.

Traditionally to bleed the brake master cylinder would require the master brake cylinder clamped in a vice and then push the piston in with a screw driver to cause the brake fluid to cycle through the hoses and back into the reservoir. Removing the air from the system.This process is called a bench bleeding to remove the air from the master cylinder. I demonstrated how to accomplish this on the car.

Due to factors beyond the control of How2AF, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  How2AF assumes no liability for injuries or property damage incurred as a result of any of the information contained in this video or text. How2AF recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of How2AF, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not How2AF. Entertainment Purposes Only.

Thank you for watching and please subscribe to the channel !

Видео Easy How To Bleed Brake Master Cylinder On The Car No bench bleeding.. канала How 2 AF