Mercedes V12 gasket overhaul W201 V12 project JMSpeedshop.com
➤Don't forget to subscribe ! http://bit.ly/SubscribeJMSpeedshop
➤Website: http://jmspeedshop.com
➤instagram: https://www.instagram.com/johanmuter/
i love this engine
when you open it it is a beauty
inside it looks al pretty good. besides there is used a lot of flex gasket where it is not needed at al is my opinion
the valve cover gasket on the passenger side was leaking.
why because there are to bolt where the thread was damaged and the bolts where loose .
so helicoils are needed there
the other leaks are the front top distribution covers.
the gaskets are hardend out. so are also changed out.
in between the V the breather pipe was in 10 pieces
what is a common problem. so will be change out
for a updated new version.
there where already the updated aluminium plates in between the heads and intake manifolds. so i can order new gaskets and O-rings.
in this 1993 engine normally is a plastis plate instead of a aluminium plate. so this is already been apart in the past
i also checked the chain stretch.
i got about 2 to 2.5 degree stretch. what is pretty low so i'm good
max stretch i could not find but a max would be around normally 12 to 14 degree stretch in most engine's
i also ordered parts to get the engine together with new seals
the intake manifold and valve cover gaskets have so damaged paint and some aluminium corrosion under the paint so
i will remove the paint.
i think i will go with bare aluminium and not repaint them
if there are any questions just ask
JMSpeedshop.com
MUSIC: MAXWELL - Love.. MAXWELL - Ready
MUSIC: ANDREW APPLEPIE -Nobody knows . ANDREW APPLEPIE - I'm so
Видео Mercedes V12 gasket overhaul W201 V12 project JMSpeedshop.com канала JMSpeedshop !
➤Website: http://jmspeedshop.com
➤instagram: https://www.instagram.com/johanmuter/
i love this engine
when you open it it is a beauty
inside it looks al pretty good. besides there is used a lot of flex gasket where it is not needed at al is my opinion
the valve cover gasket on the passenger side was leaking.
why because there are to bolt where the thread was damaged and the bolts where loose .
so helicoils are needed there
the other leaks are the front top distribution covers.
the gaskets are hardend out. so are also changed out.
in between the V the breather pipe was in 10 pieces
what is a common problem. so will be change out
for a updated new version.
there where already the updated aluminium plates in between the heads and intake manifolds. so i can order new gaskets and O-rings.
in this 1993 engine normally is a plastis plate instead of a aluminium plate. so this is already been apart in the past
i also checked the chain stretch.
i got about 2 to 2.5 degree stretch. what is pretty low so i'm good
max stretch i could not find but a max would be around normally 12 to 14 degree stretch in most engine's
i also ordered parts to get the engine together with new seals
the intake manifold and valve cover gaskets have so damaged paint and some aluminium corrosion under the paint so
i will remove the paint.
i think i will go with bare aluminium and not repaint them
if there are any questions just ask
JMSpeedshop.com
MUSIC: MAXWELL - Love.. MAXWELL - Ready
MUSIC: ANDREW APPLEPIE -Nobody knows . ANDREW APPLEPIE - I'm so
Видео Mercedes V12 gasket overhaul W201 V12 project JMSpeedshop.com канала JMSpeedshop !
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Making an engine wiring harness for the W201 V12Cylinder head gasket / Junta de culata MERCEDES 6.0 V12 MB120 .Why The AMG M275 is a Special Engine | V12 biturbo (4K)Toyota 1C Engine Full Restoration (Toyota 1C 2C 3C Engine Restoration)Exceptional Engineering | Mega Diesel Engine | Free DocumentaryMercedes AMG V8 ENGINE - PRODUCTION (German Car Factory)Mercedes V12 throttle actuators removalWhy the Nissan VQ V6 Engine is Still Being Sought After, 20 Years LaterMercedes V12 M275 engine running on a standV12 Mercedes Exhaust Removal - Trans Removal - Intake Removal - Peak Under Valve CoverStraight Piping My $850 Mercedes S600 V12! Pagani Sound For $180?!Remanufacturing a Packard V12 engine200000 km engine head refresh.M156 C63 2014 Engine rebuild (part 1)Back in Service After 16 Years - V12 BMW E31 850i Revival - Project Malaga: Part 2M120 V12 on engine stand Mercedes W201 engine swap JMSpeedshop.comEngine swaps | #5 King Zero V12 supercar!2 Stroke Cylinder Honing Facts and How I do itDetailing Dirtiest Car Ever! First Wash in 37 Years Mercedes 280 SLThis V12 Mercedes CL65 AMG Is an Insane $30,000 Used Car