Making a proper DIY sprung wheel
Grab some G54 merch here - https://www.en.garage54.ru/
In this episode we revisit something we've done a long time ago, and do it properly this time.
Our instagram https://www.instagram.com/garage__54/
Видео Making a proper DIY sprung wheel канала Garage 54
In this episode we revisit something we've done a long time ago, and do it properly this time.
Our instagram https://www.instagram.com/garage__54/
Видео Making a proper DIY sprung wheel канала Garage 54
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Making a wheel with centerpiece on bearings
What if you install FIVE flywheels onto an engine?
Making the loudest exhaust
Quad-engine Lada - 5.6 liters and 16 cylinders
Formula-1 style single lug nut conversion
Can we get a tire up to the speed of sound?
Making a BBS wheel out of a steelie
Wooden crankshaft – will it work?
Extreme steering angle (close to 90 degrees)
Miniature minibus: first drive and reactions
DIY air suspension: replacing springs with basketballs
Fitting a Lada motor to our drift bus - it drives!
Welding the prop-shaft to the motor and driving without a gearbox
DIY adaptive headlights for a Lada
Fitting 4 diffs to a Lada (ripping the pavement with all of that torque)
Can a few planks make an UAZ a better off-roader?
Super-powerful Lada – capable of doing a wheelie
80 HP tiller trolley powered by car engine
Will an airbag rip a tire apart from the inside?