Sire Bass Tuning Machine Upgrade! Hipshot Ultralites in our V7 Vintage! - LowEndLobster Fresh Look

Looking to snag one of these basses? Use my Reverb affiliate link!- https://reverb.grsm.io/lowendlobster

Reuploaded with reduced hum! Sorry for my mic audio! My mic extension cable is failing and caused a huge amount of hum. The denoiser muffles my voice a bit.

Hey everyone! Today we're going to go over the process of upgrading your stock Sire tuning machines (or any tuners really) with Hipshot Ultralite licensed tuners. One of my biggest gripes with the stock Sire tuning machines is that they add so much weight to the headstock and negatively impact balance. This upgrade will reduce the weight at the headstock by over 1/4 lb! Let's go over the process step by step!

Hipshot Ultralite Tuners (the config used for this video): https://hipshotproducts.com/collections/bass-tuning/products/hb6-1-2-ultralite-licensed-bass-tuning-machine?variant=46424783944

NOTE: USA 1/2" Ultralites come with the appropriate bushings with the 11/16" (17.5mm) where the imports come with 16mm bushings.

This bass and all my other basses with rounds are strung with MJC Ironworks Nickel Plated Stainless Steel 45-105(125) unless otherwise noted. Check them out at www.mjcironworks.com

Info on my signal chain, setup and more: https://youtu.be/QtZdeV7Ngv0

Discord: discord.gg/dzrFMzD
Facebook: fb.me/LowEndLobster
Twitter: @LowEndLobster
Instagram: Instagram.com/LowEndLobster
Reverb Shop: reverb.com/shop/lowendlobster

Видео Sire Bass Tuning Machine Upgrade! Hipshot Ultralites in our V7 Vintage! - LowEndLobster Fresh Look канала LowEndLobster