1.5kW Air cooled CNC spindle + VFD.
Welcome back to my workshop 😁.
After a recent "CNC spindle failure" i have now upgraded my CNC machine with an air cooled 1.5kW spindle which now has a VFD to control the speed.
In this video i show you "What i did" to get it up and running.
Please DO NOT play with mains electricity if you are not fully aware of the dangers or risks that are involved..... stay safe.
I hope this video is of some help.
Thanks for watching😁👍.
#franks little workshop #CNC # CNCspindle #VFD #CNCupgrade #Ooznest #Woodworking #workshoptools
Видео 1.5kW Air cooled CNC spindle + VFD. канала Frank Williams
After a recent "CNC spindle failure" i have now upgraded my CNC machine with an air cooled 1.5kW spindle which now has a VFD to control the speed.
In this video i show you "What i did" to get it up and running.
Please DO NOT play with mains electricity if you are not fully aware of the dangers or risks that are involved..... stay safe.
I hope this video is of some help.
Thanks for watching😁👍.
#franks little workshop #CNC # CNCspindle #VFD #CNCupgrade #Ooznest #Woodworking #workshoptools
Видео 1.5kW Air cooled CNC spindle + VFD. канала Frank Williams
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![110V 1.5kW Spindle With VFD Setup Guide and Testing](https://i.ytimg.com/vi/Leh1sbMh03w/default.jpg)
![Best upgrades to a DIY CNC machine](https://i.ytimg.com/vi/VLe03TqoPkM/default.jpg)
![Chinese spindles - Overview](https://i.ytimg.com/vi/xewwGgTVboE/default.jpg)
![Meet the Carbide3D VFD Spindle Kit](https://i.ytimg.com/vi/lf23E374dAU/default.jpg)
![GDZ80X73-2.2, CNC spindle, air cooled, 2.2kW](https://i.ytimg.com/vi/bed85DfAOX0/default.jpg)
![Is a Spindle Needed on a Hobbyist CNC?](https://i.ytimg.com/vi/mqqlSh0VJ1o/default.jpg)
![First Look, Wiring, And Startup Of The Lowest Cost 2 2 kw Spindle And VFD On Amazon](https://i.ytimg.com/vi/pYvKI7fF4yQ/default.jpg)
![Wiring VFD to AXBB-E motionboard](https://i.ytimg.com/vi/VvZe-E6tPG8/default.jpg)
![#MT47 Part 7 - Olivier CNC Router/Engraver. The Vevor A2-8022 VFD and Spindle. By A Whale. In 4K.](https://i.ytimg.com/vi/ESyd-l8YPLg/default.jpg)
![VFD Spindle Control via OpenBuilds BlackBox Controller and Software](https://i.ytimg.com/vi/JLf64dsxsYs/default.jpg)
![Setting up / Testing Chinese VFD and Spindle 1.5Kw Water Cooled](https://i.ytimg.com/vi/ig1DVs4zLoQ/default.jpg)
![Dirty Secrets of Chinese Spindles For CNC Routers (400W DC Spindle Teardown)](https://i.ytimg.com/vi/3-tegw48NCs/default.jpg)
![How to make a SILENT Huanyang Variable Frequency Drive.](https://i.ytimg.com/vi/x882vvX_L7Y/default.jpg)
![Spindle and VFD (Variable Frequency Drive) Setup Part 1](https://i.ytimg.com/vi/JWACS6dMMQ0/default.jpg)
![China CNC Spindel im Test | Square HF CNC Spindel Einbau und Fräs Versuch | Frequenzumrichter 400hz](https://i.ytimg.com/vi/pVPHE1TKFh4/default.jpg)
![CNC 3018 to 3040 Upgrade with 500W Spindle Motor ( Sainsmart Genmitsu )](https://i.ytimg.com/vi/an0JTNjjmwc/default.jpg)
![CNC Finale: Automatic Toolchanger Spindle Install & Testing](https://i.ytimg.com/vi/vB_FvkllLPc/default.jpg)
![Balancing a cheap 300w, 500w and 800w spindle motor](https://i.ytimg.com/vi/ZsAEgR7S2tE/default.jpg)
![A2-8022 VFD settings](https://i.ytimg.com/vi/x-PgzAt2ut0/default.jpg)
![Why a spindle on my CNC....cuz silence is golden.](https://i.ytimg.com/vi/sAUYFsiuY-8/default.jpg)