ESP32 Internet Radio Update
In this ESP32 project video I am going to show you the updated version of the ESP32 Internet radio. Let's get started!
A few weeks ago, I built this Internet radio device using an ESP32 board and an MP3 decoder module. You can check the detailed video of this project by clicking on the card here.
The project was working great but there were a couple of issues that were bothering me. First of all, I was not satisfied with the sound. There was a lot of noise in the audio signal.
The noise is very loud. After searching for a solution a discovered that the problem can be solved with a 50 cent part, an Isolation Transformer, this little part here. You can find a link it in the description of the video below.
A transformer is an electrical device that allows an AC input signal (like audio) to produce a related AC output signal without the input and output being physically connected together. The isolation transformer has the same number of windings on each coil. As the impedance is identical for the primary and secondary coil, the signal level does not change, so it allows an audio signal to pass unmodified from the primary to the secondary coil while blocking DC voltage and radio frequency interference. That's it! Goodbye noise!
💻 Code & Parts: https://educ8s.tv/esp32-internet-radio/
🎮 My Android Game: http://bit.ly/QuizOfKnowledge
Видео ESP32 Internet Radio Update канала educ8s.tv
A few weeks ago, I built this Internet radio device using an ESP32 board and an MP3 decoder module. You can check the detailed video of this project by clicking on the card here.
The project was working great but there were a couple of issues that were bothering me. First of all, I was not satisfied with the sound. There was a lot of noise in the audio signal.
The noise is very loud. After searching for a solution a discovered that the problem can be solved with a 50 cent part, an Isolation Transformer, this little part here. You can find a link it in the description of the video below.
A transformer is an electrical device that allows an AC input signal (like audio) to produce a related AC output signal without the input and output being physically connected together. The isolation transformer has the same number of windings on each coil. As the impedance is identical for the primary and secondary coil, the signal level does not change, so it allows an audio signal to pass unmodified from the primary to the secondary coil while blocking DC voltage and radio frequency interference. That's it! Goodbye noise!
💻 Code & Parts: https://educ8s.tv/esp32-internet-radio/
🎮 My Android Game: http://bit.ly/QuizOfKnowledge
Видео ESP32 Internet Radio Update канала educ8s.tv
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
#195 DIY Internet Radio using an ESP32 (Arduino IDE)Arduino LCD Tutorial ST7920#337 LoRa Off-Grid Mesh Communication: Meshtastic (ESP32, BLE, GPS)karadio32, mp3, Bluetooth, FM в одном корпусе без фона и шумов. Wifi радио.REVIEW: Majority Fitzwilliam HiFi Tuner (FM/DAB/Internet) & Music Streamer. Cheap at 1/2 the price#149 ESP32 Dual Core Programming + Speed 💨Test vs Arduino UNO (fast!)Image Recognition with the Sipeed M1 Dock boardWLAN Internet Radio mit ESP32, Karadio32, Display und Drehgeber DIY [Tutorial]Which radio module? NRF24, LoRa, CC1101, HC12, 433MHz, HC05How to make a CircuitPython Light Meter Project with a Seeeduino Xiao board and a photoresistorWorld's Cheapest Internet Radio Player! - Powered by Raspberry PiИнтернет радио Wi FI радио KaRadio на ESP32 сделай сам переделка старого приемника RadiotehnikaDIY #1 | Internet Radio with Nodemcu and Nextion Display (ESP8266) + VS1053 DIYArduino ST7789 Display TutorialDIY SW , MW , SDR Radio with ESP32 and Si5351#224 Are these boards ok? New LoRa boards tested (mainly TTGO ESP32)ESP32 WiFi Range Testing - 2.3 km using 3dBi AntennaDIY Raspberry Pi Zero Internet RadioESP32-Cam - QuickStart