Tailscale on UGREEN Full setup without Terminal - Exit Node, Subnet Routes and MagicDNS (Advanced)

In my earlier tutorial, Tailscale was running in userspace mode, which didn’t work for some users. This time we will use Docker Compose ( and give access to host tunnel device) . Your basic tailnet will be up and running in under 2 minutes.

As an option I will also show you how to enable a few powerful features:

- Exit Node (optional): Route your internet traffic through your NAS

- Subnet Routing (optional): Access every device on your LAN through Tailscale. For example, if you have a LAN printer connected to the same network as your UGREEN NAS, you’ll be able to reach it from anywhere in your tailnet.

- MagicDNS: Access your machines using simple names instead of long IP addresses.

Docker compose used is here
https://gist.github.com/kajain99/0d56447af02003c3ea0322418cf231b2

command we use to enable MagicDNS, Subnet routing and Exit node is this. Change the 192.168 part to the ip series you use in your network.

tailscale up --advertise-exit-node --advertise-routes=192.168.0.0/24 --accept-routes --accept-dns=true

____________
If you're in the US or UK and exploring UGREEN NAS options:

US: https://www.amazon.com/stores/page/743AC351-0DD2-46B2-BCDB-31CCAD7D26BE?tag=thestorageguy-20
UK: https://www.amazon.co.uk/stores/page/C175E5AC-6310-4BC3-8560-243A49CE9FD4?tag=thestorageguy-21

These are affiliate links. I earn a commission if you purchase through them, at no extra cost to you.

Видео Tailscale on UGREEN Full setup without Terminal - Exit Node, Subnet Routes and MagicDNS (Advanced) канала TheStorageGuy | Akash Jain – PNP Storage