“Horizont” fence, model “L” produced by the Plant “Mehbud”

#fence
https://mehbud.com.ua/en/product/fence-horizont/

Hello and Welcome to the channel of the Plant "Mehbud", and today I want to show you our new facility in Lviv (Ukraine).
This is a “Horizont” fence, model “L” , produced by the Plant “Mehbud”, which is made of metal produced in Slovakia, color 70-24 matt, the width of the lamella “Horizont L” is 310 millimeters
The installation of these fences was carried out by the company "Ogorozha plus", also the company "Ogorozha plus" carried out the manufacture and installation of wicket and gates.
Here we see the front part - beautifully installed sections between the posts, as well as a wicket and a gate, which have a small gap at the bottom for additional work, in order to be able to lay tiles or pour a concrete road.
A feature of the fence installed at this facility is the wide lamellas - this is the “Horizont” fence model with “L” lamella, that is, with wide lamella.
A feature of the fence of this model is the need to use a sub-structure. The sub-structure can be made of galvanized steel with a polymer coating, it can be prefabricated or welded from ferrous metal - the choice is up to the customer or installers.
The Mehbud plant, as a manufacturer, works with galvanized steel with and without a polymer coating, and we recommend a sub-structure made of galvanized steel with a thickness of 1.5 mm. It is assembled from profiles to provide reinforcement for the section of this fence.
A feature of the assembly of these sections is that they are assembled from top to bottom in order to fully ensure the concealment of all fasteners.
The Mehbud plant produces a complete set for L-lamellas - end covers, top covers and bottom covers to beautifully frame the section.
In this facility, all lamellas, except for those used on the gate, are L-type lamellas, and on the gate, the last two lamellas are M-type lamellas, in order to ensure the door sewing that fully corresponds to the model range.
Also, in order to get rid of trimming or additional work at the facility, we made a standard number of L-type lamellas and additionally three M-type lamellas for sewing the wicket and two gate leaves.
The gates in this project are sliding, but they consist of two leaves - this is a feature of the customer's choice. Since the Plant "Mehbud" is able to make lamellas "Horizont" of almost any length: they can be two, three, four, five, six meters - the maximum produced lamellas 12 meters long.
The only caveat is that the longer the lamella (and this applies to lamellae more than three meters long), the more people are required to install it.
If you use lamellas longer than three meters, then it is recommended to mount them not by two people, but by a team of three or more people, since the lamellas need to be level, properly secured and not damaged during installation.
All products of the "Mehbud" Plant, including these lamellas, are supplied in a protective film. Thus, first the assembly is carried out at the facility, and then the protective film is removed, so that during assembly, transportation and installation, the polymer coating is not damaged. In this case, we have a matte polymer coating, gray, from Slovak metal.
All metal and all our products are certified - we have certificates from the metal manufacturer, as well as all our products are certified on the territory of Ukraine, there are corresponding UkrSEPro certificates - you can find them on the website, or ask managers.
We monitor the quality of work and installation at all facilities where our products are used. We put on our fences a label from the "Mehbud" Plant, which testifies to the quality and guarantees the invariability of quality, and if additional work is necessary (replacement, etc.), we can always find your order and help.
Sometimes it happens that during operation, as a result of mechanical impact, some lamellas (a fallen tree, etc.) were damaged. In such cases, we are always ready to meet the client's needs and individually produce a certain number of replacement lamellas.
Among the products of the Mehbud Plant you can find a fence for every taste. The Mehbud Plant is a leader among the manufacturers of metal fences. The plant manufactures Fence Blinds, Rancho, and others. A variety of models and colors will help you realize any design decisions.
The specialists of the Mehbud Plant will help you choose a fence that will become a worthy frame for your home ownership.
We will be glad to see you as our clients.
Subscribe to our channel and thank you for watching.

Видео “Horizont” fence, model “L” produced by the Plant “Mehbud” канала Mehbud & Partners