Low Clutch Bite Point? How I Did a Quick Fix. Freelander and other cars

Is your clutch bite point too near the floor? Fed up with trying to bleed out the air but with no success? Tried forward and reverse bleeding but still no success! Here is how I did a quick fix by extending the clutch peddle travel, so any last bits of air in the system that won’t come out don’t have such a significant effect.
After fixing the clutch the bite point was another 1- 1.5 inches higher up so was a huge improvement. Well happy with it. Hopefully it should last. This modification just allows for more pedal movement and moves the pedal up so it starts from a higher point. There is extra movement in the master cylinder that is not being used and this is now taken advantage of. Moving the bite point higher means that you also get better disengagement of the clutch and hence nicer gear changes.

All you need is some drill bits (and a drill). You need. 13mm and a 6.5mm bit. Here are some nice cobalt ones on Amazon which are best: Amazon UK: https://amzn.to/2PcI44A
Or Amazon USA: https://amzn.to/2DbS35p

Rubber disposible gloves are also useful, here's the links for
eBay USA: https://ebay.us/GGqmTJ
eBay UK: https://ebay.us/cE1BHK
Amazon UK: https://amzn.to/3aikbl8
Amazon USA: https://amzn.to/3cdwjpD
Amazon Canada: https://amzn.to/2Q0VHZm
Amazon Australia: https://amzn.to/2QlUawX

You need to find a piece of hard plastic, aluminium or other hard material. I used a wire brush handle! Have a look on those Amazon links for something suitable.

If you have a k-series petrol engine Freelander or MGRover instead then this fix for the slave cylinder mounting should help: https://youtu.be/z8t2dvIP3cY

If you have a Rover or MG then this video on changing the pivot point on the clutch may also help: https://youtu.be/trd_b2LDX7g

Videos of fixes on this Freelander TD4 so far:
Rear window fix: https://www.youtube.com/watch?v=xLQOzLaq5mw
Crankcase filter upgrade to cut smoke: https://www.youtube.com/watch?v=FQwZrjGUN-o
Changing the LP fuel pump and fuel filter: https://www.youtube.com/watch?v=BPHUbgBAF_I
Fixing air leaks on corroded alloys: https://www.youtube.com/watch?v=vYcPxq3F6a4
How to clean the intercooler to cut smoke: https://www.youtube.com/watch?v=UBWhqeH0boY
Fixing the fuel burning heater (aux heater): https://www.youtube.com/watch?v=BFVqjFYsV2M
Fixing the clutch, low bite point: https://www.youtube.com/watch?v=4X8oAR3aYNA
Fixing the HP fuel pump regulator: https://www.youtube.com/watch?v=l0kEew05Vw0
Fixing electric window cable, done on this car, video was on another: https://www.youtube.com/watch?v=btQ50b5lHos

Other Freelander videos of mine that may also be useful:
Fitting a low coolant alarm: https://www.youtube.com/watch?v=IQXcK0nf_MU
Fixing the SRS warning light:
https://www.youtube.com/watch?v=4kap_pNlZHI
Making the petrol k-series engine reliable: https://www.youtube.com/watch?v=aMcjc3LmMv0
How to fix & monitor VIS motors on the 2.5 V6 engine: https://www.youtube.com/watch?v=_4NNxnxKugI
Starter motor fix (generic Bosch): https://www.youtube.com/watch?v=rtuMCh3iIlw
Fixing a torn car seat (generic): https://www.youtube.com/watch?v=qRDXUsOD6SA
Clutch slave cylinder fix on petrol k-series cars: https://www.youtube.com/watch?v=z8t2dvIP3cY
How to fix the rear electric window: https://www.youtube.com/watch?v=BKaiaPNmTzw
How to change the 2.6 V6 (KV6) engine cambelts, cheaply! - https://www.youtube.com/watch?v=yztTtYsFF0Q

Check my channel comeinhandynow for other useful videos like calibrating a torque wrench, tips for making brake pipes, checking wheel alignment plus lots more DIY and reviews. Here: https://www.youtube.com/channel/UCFakB9XL0kQxxBLctPBYwOA/videos?view_as=public

If anyone wants to show appreciation for any money savings, use this link:
http://paypal.me/comeinhandy

Subscribe to the channel for similar DIY, fixing stuff, car bits and tech reviews here:
https://www.youtube.com/user/comeinhandynow?sub_confirmation=1
Note, if you want to be notified of new videos click on the bell symbol on my home page.

The video is about my personal opinion and experience and contains no paid for product placements. No responsibility is accepted for any perceived recommendation for or against a product or feature nor any consequential damage or harm since this video is just my personal experience. You accept by watching this video that you accept any responsibility for any subsequent actions or decisions that you take.

Note on copyright / licensing: This video was created using Apple iMovie and as such any music or video content is fully licensed by their terms and conditions for free publication and distribution. Additional background music free used royalty and copyright free (no copyright songs) from the following source:
Song “paradise” by Federico Aldinucci
AndyM -Oasis [Faded NCS Release]

Видео Low Clutch Bite Point? How I Did a Quick Fix. Freelander and other cars канала comeinhandynow