Automotive Trim Carpets' - Car Upholstery
✅Any donation to support the channel will be much appreciated!
Paypal : cechaflo@gmail.com
✅Get our courses at: https://www.cechaflo.com
---------------------------------------------------------------------------------
This 'basic video' shows on a mock-up one of several 'traditional ways' to give shape on front and rear part of transmission tunnel when installing 'automotive non-heat molded carpets'. Most of old car trimmers know how to do it.
This common way consists in doing a 'T shape cut'. One long cut from left lowest bottom point all around the rounded section until touching the other right bottom point. A smaller perpendicular 'cut' should be done from upper edge to center of transversal line/cut.
For this 'basic demonstration' I am using 'non-backed automotive carpet'. This process would help us understand how to cut and give shape to carpet material around front and rear bulky part of transmisison tunnel.
The 'T' shape 'cuts' are mostly used on automobiles front and rear floor sections.
On trucks it should be done just on front section.
At the beginning of the video I am showing two samples on 'automotive carpet'. There are small differences when working on this kind of material. As we can see, the 'cut edges' would be sewn on its reverse side.
It is important to mention these 'must do cuts' in different ways are commonly used on ' automotive trim carpets' for automobiles. These carpets never would be heated to give them shape. Besides, we should be careful while cutting the edges. They easily fray.
As a particular opinion, I'd rather go for 'custom molded carpets' which are more resistant, all of its forms go in place, and easier to install.
I hope this information is useful for you!
Cesar
Related Videos:
How To Make A Carpet Dashboard Cover:
https://youtu.be/eT-nvR6XNWc
Binding tips on trim carpet:
https://www.youtube.com/watch?v=1K-qg6rvl7k&t=537s
Overcasting Carpet Edges:https://www.youtube.com/watch?v=iqR8bxA-iM0&lc=UgxvChGoVCDrdualOxp4AaABAg
Видео Automotive Trim Carpets' - Car Upholstery канала Cechaflo
Paypal : cechaflo@gmail.com
✅Get our courses at: https://www.cechaflo.com
---------------------------------------------------------------------------------
This 'basic video' shows on a mock-up one of several 'traditional ways' to give shape on front and rear part of transmission tunnel when installing 'automotive non-heat molded carpets'. Most of old car trimmers know how to do it.
This common way consists in doing a 'T shape cut'. One long cut from left lowest bottom point all around the rounded section until touching the other right bottom point. A smaller perpendicular 'cut' should be done from upper edge to center of transversal line/cut.
For this 'basic demonstration' I am using 'non-backed automotive carpet'. This process would help us understand how to cut and give shape to carpet material around front and rear bulky part of transmisison tunnel.
The 'T' shape 'cuts' are mostly used on automobiles front and rear floor sections.
On trucks it should be done just on front section.
At the beginning of the video I am showing two samples on 'automotive carpet'. There are small differences when working on this kind of material. As we can see, the 'cut edges' would be sewn on its reverse side.
It is important to mention these 'must do cuts' in different ways are commonly used on ' automotive trim carpets' for automobiles. These carpets never would be heated to give them shape. Besides, we should be careful while cutting the edges. They easily fray.
As a particular opinion, I'd rather go for 'custom molded carpets' which are more resistant, all of its forms go in place, and easier to install.
I hope this information is useful for you!
Cesar
Related Videos:
How To Make A Carpet Dashboard Cover:
https://youtu.be/eT-nvR6XNWc
Binding tips on trim carpet:
https://www.youtube.com/watch?v=1K-qg6rvl7k&t=537s
Overcasting Carpet Edges:https://www.youtube.com/watch?v=iqR8bxA-iM0&lc=UgxvChGoVCDrdualOxp4AaABAg
Видео Automotive Trim Carpets' - Car Upholstery канала Cechaflo
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Как сделать подиумы / Citroen C-Elysee #magicsound_ntA Plastic Piece Wrapped in Leather - Auto UpholsteryHow to Mold a car carpet? basic Upholstery tutorialHow to Instal Car Full Pvc Mat | Easy Car Floor Lamination | Tamil4UComo Hacer facil una alfombra de automovil - Cars CarpetA Basic Seat Cushion Cover -Car Upholstery (1)Car Sunvisor in Leather - Video 1 Automotive upholsteryBinding Tips - Car Upholstery BasicsComo Tapizar Asientos de Suburban en cuero De una Manera Facil - TapiceriaReupholstering a Vintage Car Door PanelBlind-Stitches Foamed Channels-Upholstery Basics car upholsteryHow to install a new carpet Kit in your Classic Car | Hagerty DIYA Shift Knob in Leather- Auto UpholsteryCracked Dashboard Repair With Fiberglass BOX CHEVY CAPRICE DASH RESTORE How To Fiberglass Dash PadHow to Repair Driver Seat Foam using kitchen knife and Tapered Grater Home-made DIY.PART 1 TRUCK BENCH SEAT FOAM FROM SCRATCH CUSTOM UPHOLSTERY ALCHEMY KUSTOMCheap and effective heat barrier for car interiors Episode 139 AutorestomodHow to Install Car Full Floor Pvc MatA Handbrake Lever in leather- Auto UpholsteryBinding a 90° Square Corner - Car Upholstery (Beginners)