Clean and Grease Lee Press
Just showing how dirty my press gets, and how I clean and re-grease the ram. Its just a little preventative maintenance to help the press last longer. I usually do this after 1500 cycles of the ram.
If I want to really get all the grease off I'll use brake cleaner on towel. I'll also use brake cleaner to clean out the dies.
Видео Clean and Grease Lee Press канала Country View Acres
If I want to really get all the grease off I'll use brake cleaner on towel. I'll also use brake cleaner to clean out the dies.
Видео Clean and Grease Lee Press канала Country View Acres
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Proper Neck Tension - How Case Neck Tension Affects Performance
Reloading 101: Hornady's How-To & Handloading History
Homemade Bullet Lubes From Home Depot Pan Lubing - Beginning To End
Lee Turret Press Set Up Discussion And Reloading 9mm
Competition Seating Die Comparison - Redding vs. Forster vs. Whidden
Lee Classic Cast Press Mounting, Setup, and First Use
6.5 PRC Load Development: Bergara Wilderness HMR
RIFLE DIE SETUP ON A SINGLE STAGE PRESS - HD
Searching for Dry Firewood on the Homestead
Cast Bullet Sizing and Lubrication - RCBS Lube-A-Matic Press
Getting Top Performance With Our Lee Auto Drum Powder Measures
Inexpensive Brass Cleaning
Lee Loadmaster Maintenance and setup (pt 1)
What did the fencing cost? How big is the pasture?? Why double braces?? Fencing Project Q&A
Case Cleaning Solution for Reloading, homemade on the CHEAP..!
Weekend Project. Restoring Rusty Reloading Dies to Like New Again
The ZERO Reloading Press - Product Launch, Overview
Bobs' 223 Bulk Bullets - VihtaVuori N133 and N135
Cutting Hay Field After Work, Struggling with the Sicklebar Mower