Liquid dispenser 2
The upper surface of yellow cup at its lowest position is lower than the liquid surface in the tank. So the cup is filled fully with the liquid.
Turn pink cam to raise the cup to its highest position to get:
1. The coincidence of cross holes on the orange bar and on the blue support.
2. The upper surface of yellow cup is higher than the liquid surface in the tank.
Then the liquid amount contained in the cup flows out through green pipe (red arrow). The red line shows liquid surface in the cup.
For dispencer of large liquid amount see “Liquid dispenser 1”:
http://youtu.be/4fbcr1ISroU
Видео Liquid dispenser 2 канала thang010146
Turn pink cam to raise the cup to its highest position to get:
1. The coincidence of cross holes on the orange bar and on the blue support.
2. The upper surface of yellow cup is higher than the liquid surface in the tank.
Then the liquid amount contained in the cup flows out through green pipe (red arrow). The red line shows liquid surface in the cup.
For dispencer of large liquid amount see “Liquid dispenser 1”:
http://youtu.be/4fbcr1ISroU
Видео Liquid dispenser 2 канала thang010146
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Push to turn 90 deg.Spatial ratchet mechanism 2Scissor mechanism 1bCam and gear mechanism 11Keeping direction unchanged during motion 11Wobbling disk mechanism 6Output positions subject to input motion direction 2Drawing Lemniscate mechanism 2Cam and gear mechanism 12Planetary drive 3bStar wheel drive 3Planetary drive 2Friction globoid variator 5bPipe connection 1Push to rotate 180 degrees back and forthPart orientation 4Spring linkage mechanism 3Transmission between intersecting shaftsMechanical OR logic gateUniversal joint 4