BMW M62 Non-VANOS Timing Chain and Guide Replacement 540i 740i 840i

This instructional video will give you a good idea of what it takes to replace the timing chain and guides on a non-VANOS M62 BMW engine. The car in the video had a failed reversing rail. The car still ran fine but made an awful metal on metal noise. If you have pulled your lower oil pan and found bits of plastic timing chain guide, then it is time to do this on your BMW! Don't wait until the chain breaks!

Parts Required:
-Timing Chain Tensioner: 11 31 7 531 813
-Timing Chain: 11 31 1 741 746
-Reversing Rail: 11 31 1 741 777
-Tension Rail: 11 31 1 741 236
-Guide Rail: 11 31 1 704 945
-Left Upper Timing Cover Gasket: 11 14 1 741 128
-Right Upper Timing Cover Gasket: 11 14 1 741 127
-Lower Timing Cover Gaskets: 11 14 1 436 978
-Left Valve Cover Gasket: 11 12 9 069 872
-Right Valve Cover Gasket: 11 12 9 069 871
-Valve Cover Bolt Seal (x11): 11 12 1 437 395
-Cam Sensor O-Ring: 12 14 1 748 398
-Front Crank Seal: 11 14 1 275 466
-Water Pump: 11 51 0 393 340
-Water Pump Gasket: 11 51 1 731 372

BMW Tools Required:
-Crankshaft Holder: 11 2 450
-Camshaft Locker Set: 11 2 440

General Tools Required: (Tools I used)
-1/2 in. Drive:
-Socket Wrench
-Extension
-Breaker Bar
-1 7/16 in. socket (oil filter cap)
- 27 mm. socket (crank bolt)
-13 mm. socket
-3/8 in. Drive:
-Socket Wrench
-Extension
-10 mm. socket
-13 mm. socket
-19 mm. socket (chain tensioner)
-E10 socket
-E12 socket
-H6 hex socket
-T25 socket
-T27 socket
-T30 socket
-T50 socket
-1/4 in. Drive:
-Socket Wrench
-Extension
-8 mm. socket
-10 mm. socket
-13mm. socket
-12 mm. wrench
-13 mm. wrench
-27 mm. wrench
-1 1/4 in. wrench (fan clutch)

Видео BMW M62 Non-VANOS Timing Chain and Guide Replacement 540i 740i 840i канала Truly Motors