Make a Custom Camera Mount Part 3 - Finale

In this series together we're going to design and make a custom camera mount using Fusion 360 for the CAD, Cura Slicer for the 3D model prep and a Creality Ender 3 V1 to 3D print it on.

We're going to be doing a little metalwork on the mini lathe to make a screw, and then we're going to put it all together.

In this the final part we make a custom thumbscrew using the mini-lathe and put it all together. We cover turning a part in brass and cutting a 1/4-20 UNC external thread using the 29 degree single point screw cutting method in conjunction with a hand mandrel and a dial indicator.

See Part 1 Here - https://youtu.be/pwnNw46JXXw

See Part 2 Here - https://youtu.be/czpMr9mnzTc

Home Made Brass Pressure Washer Adapter (more info about mini lathe screw cutting) - https://youtu.be/YSXo2eKQJzE

Patreon for 3D file downloads - https://www.patreon.com/RadBoogie

Metric Thumb Screws - https://ebay.us/B9qwrT
Imperial Thumb Screws - https://ebay.us/ALKywp

0:00 - Intro
1:21 - Walking through the drawing
3:39 - Turning the shaft
8:40 - Parting off
10:45 - Turning the other end
24:18 - Cutting a thread with the 29 degrees method
34:22 - Hand filing a flat
45:50 - Press fitting the knob
47:00 - Bypassing the metalwork
48:38 - Tapping the threads in the clamp
52:32 - Trying out the new camera mount
55:37 - Summing up

Видео Make a Custom Camera Mount Part 3 - Finale канала Richard Moore - Engineering at Home