The antifouling project 2/6 - grinding down the rusty keel
As always things are not that easy as they seems, first I hand sand down the bow thruster hole and then I sand down the engine leg and the edges of the rudder.
I thought the keel was a easy job but I was wrong, it is almost impossible to sand down with the sander so I get my old 600W Bosch grinder, 5 grinding discs later I reach my goal and I can then apply some rust converter as the first part in the process.
IMPORTANT : Do not get the rust converter on the skin !!
Видео The antifouling project 2/6 - grinding down the rusty keel канала Tino G - Sailing
I thought the keel was a easy job but I was wrong, it is almost impossible to sand down with the sander so I get my old 600W Bosch grinder, 5 grinding discs later I reach my goal and I can then apply some rust converter as the first part in the process.
IMPORTANT : Do not get the rust converter on the skin !!
Видео The antifouling project 2/6 - grinding down the rusty keel канала Tino G - Sailing
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
The antifouling project 3/6 - keel rust treatment and 4 coats of epoxy primerThe antifouling project 4/6 - last 3 coats of epoxy primer and new S-drive sleeveThe antifouling project 5/6 - antifouling and wrong mounted S-drive sleeveRUSTY KEEL! Winter VLog pt 16OHANA - The restoration of a 1984 Hunter 25.5DON'T BUY ANCHOR CHAIN BEFORE WATCHING THIS!NEVER DO THIS AT HAULOVER INLET!! BIG MISTAKE! | Boats vs Haulover InletFiberglass Gel Coat Repair#54: In Other News ... Our Keel's Falling OffKEEL ISSUES BANKRUPTED US!! | Sailing SaettaFiberglass Gelcoat Repair (So you hit something with your boat)Comparing rust converters on our steel sailing yacht - [EP-9]#57: When Re-Torquing Keel Bolts: 250 = 180How To Use Peelaway Marine To Remove Antifouling Coatings On Your BoatSteel Hull Refit - A dirty Episode / SV DESTINY / # 5C&C 115 Dacha's Keel is Reattached!How to: check and replace an anode (zinc) - Yachting Monthly#143 Is She Still SEAWORTHY?? An Old Steel SailboatEpisode #3: DIY SAVING £££s -- TREATING THE KEELFiberglass Hull Repair