3DLabPrint/ 3DLabGang Joker V-tail glider/ hotliner maiden
Maiden flight of my newly printed V-Tail glider/ hotliner from 3DLabprint/ 3DLabGang, this is the best design so far i have seen, printed and flown out of 3D printed planes (hope 3DLabprint is taking notes on glue joints overlapping and so on, a true awesome and well thought out design).
Link to the model:
https://3dlabprint.com/shop/joker/
I used Sunnysky x2216 1250kv which already has reversed 3,2mm shaft, Plush 30A ESC with 2A BEC (enabled brake), Pelican 36/3,2/8/M3 spinner and aeronaut cam 9,5x6 propeller blades, 4x HXT servos (V-tail, ailerons), and two new Pelican 9g servos for flaps which are complete garbage (they don`t center at all, complete complete crap, worst spent 12€ in my life i`d say...) and 3s 2200mAh Turnigy 35C battery, after 14 minutes of flight the battery voltage was at 11,6V and according to battery checker 51% of juice left.
Plane was mostly printed from HK PLA and a bit of EcoPLA from 3DJake,
Whole all up RTF plane weight is 1270g
Видео 3DLabPrint/ 3DLabGang Joker V-tail glider/ hotliner maiden канала Dejan Matičič
Link to the model:
https://3dlabprint.com/shop/joker/
I used Sunnysky x2216 1250kv which already has reversed 3,2mm shaft, Plush 30A ESC with 2A BEC (enabled brake), Pelican 36/3,2/8/M3 spinner and aeronaut cam 9,5x6 propeller blades, 4x HXT servos (V-tail, ailerons), and two new Pelican 9g servos for flaps which are complete garbage (they don`t center at all, complete complete crap, worst spent 12€ in my life i`d say...) and 3s 2200mAh Turnigy 35C battery, after 14 minutes of flight the battery voltage was at 11,6V and according to battery checker 51% of juice left.
Plane was mostly printed from HK PLA and a bit of EcoPLA from 3DJake,
Whole all up RTF plane weight is 1270g
Видео 3DLabPrint/ 3DLabGang Joker V-tail glider/ hotliner maiden канала Dejan Matičič
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![3D Lab Print B25 Mitchell Maiden Flight](https://i.ytimg.com/vi/ctJC3qks8Mg/default.jpg)
![DIY Rc plane - Homemade Rc glider](https://i.ytimg.com/vi/H4rRfQVVW5g/default.jpg)
![3d Printed Funjet - Build and Maiden from 3dlabPrint: "Razorblade"](https://i.ytimg.com/vi/ay56z7KoOmI/default.jpg)
![AMAZING Micro XXS 'Eta' INDOOR POWERED GLIDER: Daniel Hör (Picasso of Depron)](https://i.ytimg.com/vi/bWFaHDK54hU/default.jpg)
![NEW 3D Printed Racing Drone](https://i.ytimg.com/vi/RqZCWpGHpHQ/default.jpg)
![Flightboard - 3d printed Glider Maiden Flight](https://i.ytimg.com/vi/duSc550YoEg/default.jpg)
![Best 3D Printed Plane on a Budget - Longboard 1000 3d-printz](https://i.ytimg.com/vi/hQ6RkmKkm6Y/default.jpg)
![IL-2 Sturmovik maiden flight 3DLabPrint](https://i.ytimg.com/vi/HtWziNePk-w/default.jpg)
![How to Build 3D Printed Eclipson Model R - RC Airplane](https://i.ytimg.com/vi/08ZFhnXWaRc/default.jpg)
![12 Most Efficient Four Seat Airplanes](https://i.ytimg.com/vi/Amg6XA61xfU/default.jpg)
![JOKER - 3D printed RC plane - step by step assembly](https://i.ytimg.com/vi/mE-3GPrhKgw/default.jpg)
![RC HLG - Hand Launch Glider Building and testing video 3D printing, Ender 5 plus 3d printed rc plane](https://i.ytimg.com/vi/ujdX_m-NX7A/default.jpg)
![Magic of Soaring - Flat Field Thermal Soaring](https://i.ytimg.com/vi/YsYLb1AwPvY/default.jpg)
![3D LabPrint B 25 Mitchell](https://i.ytimg.com/vi/O48Lh7Kms3w/default.jpg)
![Fusion 360 - inner structure for 3d printing](https://i.ytimg.com/vi/pxm-CJLZ0nI/default.jpg)
!["AWESOME RC LANDINGS" - MIXED MODELS / SPORTS & GENERAL # 7 - 2019](https://i.ytimg.com/vi/3UmfC-KVSQI/default.jpg)
![How to Assemble Eclipson Model A RC Airplane - LW-PLA](https://i.ytimg.com/vi/VL8SChNY3Gg/default.jpg)
![3D Printed Micro SportCam RC Aircraft - sub-250g!](https://i.ytimg.com/vi/kWfxT5lEfs8/default.jpg)
![Fancy and ground effect landings in a glider](https://i.ytimg.com/vi/8aVvyaTI0tk/default.jpg)
![How To Make Twin Motor RC Model Airplane - DIY Brushless Motor Model Airplane.](https://i.ytimg.com/vi/PdrjVSdA7_w/default.jpg)