Ep02: Going Solar with UPS Solar | Custom Shelving!
Well, we finally decided after nearly 2 years of researching, quotes, and more researching, to take the plunge and add a Solar PV battery system to our house. But wait, there's more! We also plan to add a Solar Diverter so we can electrically heat our hot water instead of gas.
This time we modify the battery rack to cope with the weight of the battery packs. This is only a light weight studio rack and the supplied brackets are not suitable.
______________________________________________________________________
Link to Energy Saving Trust website to get a rough idea of what Solar PV could do for you (in the UK):
https://energysavingtrust.org.uk/tool/solar-energy-calculator/
Spec of the system we hope to install (contract signed, pending installation):
18 panels - 12 panels on the West roof, 6 panels on the East roof
Batteries - 3 x 2500 mAh lithium cells in a modular 19" rack format (Fox ESS)
5 kW hybrid inverter from Fox ESS
Emergency Power System to allow us to run off-line
Eddi Solar Diverter for hot water
-- Hope to generate 5600 kWh / year (currently use 4800 kWh per year) --
Видео Ep02: Going Solar with UPS Solar | Custom Shelving! канала routercnc
This time we modify the battery rack to cope with the weight of the battery packs. This is only a light weight studio rack and the supplied brackets are not suitable.
______________________________________________________________________
Link to Energy Saving Trust website to get a rough idea of what Solar PV could do for you (in the UK):
https://energysavingtrust.org.uk/tool/solar-energy-calculator/
Spec of the system we hope to install (contract signed, pending installation):
18 panels - 12 panels on the West roof, 6 panels on the East roof
Batteries - 3 x 2500 mAh lithium cells in a modular 19" rack format (Fox ESS)
5 kW hybrid inverter from Fox ESS
Emergency Power System to allow us to run off-line
Eddi Solar Diverter for hot water
-- Hope to generate 5600 kWh / year (currently use 4800 kWh per year) --
Видео Ep02: Going Solar with UPS Solar | Custom Shelving! канала routercnc
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Ep1: Introduction to my MiniGcode CreatorEp 5: Drill Press Upgrade | Machining the pulley and main headEp06: Clough42 Electronic Leadscrew | Mounting the enclosureEp31: CNC Ethernet Upgrade - Movement !Ep42: Drill Press upgrade | Lift Motor ProblemEp02 DC solar monitor - proof of conceptEp55: Drill Press upgrade | Finished at last!Episode 6: DIY CNC Gantry assemblyEp13: Drill Press Upgrade | Z crank assemblyEpisode 10 e-kart: Brakes, Brackets, Battery Box, and more ....!Episode 7 e-kart: Axle drive hubs . . .Ep2: free BETA download - my MiniGcode CreatorEp17: Drill Press Upgrade | Front mounting plateEp48: Drill Press upgrade | Adding a brake to the knee!Ep40: Drill Press upgrade | Making it bigger . . .Ep38: Drill Press Upgrade | Broken knee - can we fix it ?Ep37: Drill Press Upgrade | Machining a new drive pulley !Ep31: Drill Press Upgrade | Fitting DROs to the XY tableEp03 DC solar monitor - it's working!Ep04 DC solar monitor - Upgrade to closed loop!