How to connect a surround sound receiver - Part 3

How to connect a surround sound receiver - Part 3
http://bit.ly/2keJazf

“VERY IMPORTANT! ARC is NOT the HDMI output. It's just a feature built into it and most new receivers have it. You're OK to use the ARC output. Just disable it in the settings menu.”

• We are using the Yamaha RX-A2040BL 9.2-Channel Wi-Fi Network AVENTAGE Home Theater Receiver – http://amzn.to/2keP6Z5

What is ARC?
ARC stands for Audio Return Chanel – BEWARE OF ARC. This is bad. You and still use the HDMI but you will want to disable ARC in the settings.

IP Commands (Networking)
Use IP control.

• The Yamaha receiver has wireless but to avoid challenges you will want to hardwire your network as a best practice.

RS 232C – This is an option to control your receiver.

Remote inferred blaster – Never blast the front – use Mini 3.5 mm jack

Trigger Out – Projector screen –

Component Video

Phono Record player

Composite Video (Not HD)

Digital Coax

Optical
Multi Channel Input –

Zone out – Multi Room speakers
Pre Out – this is for control not for power. You would need an amplifier

Speaker inputs

Surround
FM and AM antenna
ou should spend $500.00 or more for a good receiver.

Видео How to connect a surround sound receiver - Part 3 канала Alan Clegg