How about a fulltang DARK BOWIE? - Knife Making
Buy our knives at:
https://www.barbershop-customs.com/
https://www.barbershop-customs.com/
Here's a video documenting how we have made a dark, fulltang bowie. Let us know your opinion about this project in the comments!
Our knifemaking jig:
https://www.barbershop-customs.com/product/knifemaking-jig/
FB: https://www.facebook.com/barbershopcustoms
INSTAGRAM: https://www.instagram.com/barbershop_customs/
SHOP: https://www.barbershop-customs.com
REDDIT: https://www.reddit.com/user/Barbershop_Blades
EMAIL: info@barbershop-customs.com
How to blacken steel (hot oxide):
A mixture of caustic soda (700g), potasium saltpeter (250g) and water (1,2 l)
The temperature of the solution should be kept between 120 - 140 C.
I keep the knife inside for about 30 minutes to get consistent black colour, you can manipulate the time to achieve different results, shorter period should give you dark brown or purple - ish colour.
Be careful - this mixture is highly corrosive!
Heat treatment:
-Austenizing temperature: 830 C
-Tempering: 180 C
Specs:
Dark
Steel: 80CrV2
Blade thickness: 5 mm / 0.197"
Length: 290 mm / 11.417"
Blade width: 45 mm / 1.772"
Blade length: 160 mm / 6.299"
Weight: 320 g
Handle: Stabilized poplar burl, Bog oak, brass pins
“Errare humanum est, sed perseverare diabolicum"
"To err is human, but to persist (in the mistake) is diabolical." ~ Seneca
#knifemaking #bushcraft #bowie
Видео How about a fulltang DARK BOWIE? - Knife Making канала Barbershop Customs
https://www.barbershop-customs.com/
https://www.barbershop-customs.com/
Here's a video documenting how we have made a dark, fulltang bowie. Let us know your opinion about this project in the comments!
Our knifemaking jig:
https://www.barbershop-customs.com/product/knifemaking-jig/
FB: https://www.facebook.com/barbershopcustoms
INSTAGRAM: https://www.instagram.com/barbershop_customs/
SHOP: https://www.barbershop-customs.com
REDDIT: https://www.reddit.com/user/Barbershop_Blades
EMAIL: info@barbershop-customs.com
How to blacken steel (hot oxide):
A mixture of caustic soda (700g), potasium saltpeter (250g) and water (1,2 l)
The temperature of the solution should be kept between 120 - 140 C.
I keep the knife inside for about 30 minutes to get consistent black colour, you can manipulate the time to achieve different results, shorter period should give you dark brown or purple - ish colour.
Be careful - this mixture is highly corrosive!
Heat treatment:
-Austenizing temperature: 830 C
-Tempering: 180 C
Specs:
Dark
Steel: 80CrV2
Blade thickness: 5 mm / 0.197"
Length: 290 mm / 11.417"
Blade width: 45 mm / 1.772"
Blade length: 160 mm / 6.299"
Weight: 320 g
Handle: Stabilized poplar burl, Bog oak, brass pins
“Errare humanum est, sed perseverare diabolicum"
"To err is human, but to persist (in the mistake) is diabolical." ~ Seneca
#knifemaking #bushcraft #bowie
Видео How about a fulltang DARK BOWIE? - Knife Making канала Barbershop Customs
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Forging a Mosaic Damascus Bowie Knife - The Complete BuildMaking a HUNTING knife with a CLASSY HandleForging a BOW out of Rusted Leaf SPRINGWhy Japanese Chef’s Knives Are So Expensive | So ExpensiveMaking TomahawkMake a Kitchen Knife from Farm Machinery PartsKnife Making - FIGHTER w/ BLACK BLADE and Stabilized Wood HandleMaking HUNTSMAN CS:GO KnifeMaking Tapered Full Tang knifeKnife Making: Feather Damascus HunterDamascus steel from an old chainsaw chain USSR.Making a Hidden Tang Hunting KnifeKnife Making - Handforged DAMASCUS Hunting Knife w/ Elephant Ivory (synthetic) HandleKnife Making - Kiritsuke || Japanese Kitchen KnifeKnife making - Integral Damascus knife with a guardWOOTZ steel from old drills . MAKING A VIKING SEAX!!!Forging JAGDKOMMANDO KNIFE Out of Rusty Coil SpringForging Elven Knives | Inspired by The Lord of the RingsBushcraft Knife & Leather Sheath | Knife MakingKnife making - OLD FILE Knife made the Right Way