Demonstration of Hydraulic hose assembly using Re useable hydraulic hose fittings and basic tools

How to make, repair, or assemble your own Hydraulic Hose assembly using and simple hand tools and field fit reusable hose tails.

Our camera Nikon B700
http://ebay.us/ZcPlhT

If you are in the US get your reusable hose fittings here
http://ebay.us/TfYJT8

Angle grinder eBay US affiliate
http://ebay.us/q28De4
we use and recommend "preferred" cutting discs

Our Stauff 0 to 700 bar digital pressure gauge
https://www.hydraulic.online/store/STAUFF-Digital-Pressure-Test-Kit-8-800-PSI-2M-Test-Hose-p88298058

The Hydraulic hose used is a 3/4 inch inside diameter SAE 100R2 AT Two-Wire non-skive hose rated to 3100 PSI working pressure and a temperature rating of -40 to plus 120 degrees Celcius.

Field fit reusable fittings used are 3/4 inch BSPT male on one end and 3/4 inch BSPP female hose tail with two-wire bodies. The finished assembled length is to be 1440 mm.

This is one of the first videos we ever made for our channel.
It is a quick and speedy DIY hydraulic hose repair and or assembly video, but it does have a few safety issues, a few corners cut and important points missed.

*Please work carefully during the removal, preparation, & assembly of Hydraulic Hoses. Before removal of the hose check the work area very carefully & make sure that hazards such as heavy loads supported by pressurised oil inside the hose are either lowered to the ground, adequately supported or chained up. Death or severe injury can result if you miss this check. Hot Sparks will be generated when cutting the steel wire reinforced hose with an angle grinder, keep flammable items away from the work area, wear appropriate protective clothing & equipment and keep the work area clear of potential trip hazards*

Also please be aware that after any hydraulic hose assembly and before connecting the new hose assembly to your hydraulic system blast or flush the hose clean with compressed air and preferably push a foam projectile or two through the hose.

This will prevent any contamination created during the cutting and assembly process from entering and possibly damaging sensitive hydraulic components.

For a much more detailed video including pressure testing the hose after assembly please click or copy and paste link into your browser
https://www.youtube.com/watch?v=JndOT3qvhM4

If you are looking for field fit reusables click or copy and paste link into your browser
https://www.hydraulic.online/store/search?keyword=reusable

If you are looking for hose click or copy and paste link into your browser
https://www.hydraulic.online/store/search?keyword=100R2

Видео Demonstration of Hydraulic hose assembly using Re useable hydraulic hose fittings and basic tools канала HYDRAULIC.ONLINE GOLD COAST