Enabling Stereo Pairing on the IKEA ENEBY - Finishing Unfinished Business

So this video was long over due. I kind of forgot about it, but it should still be relevant.

In this video I'm showing you how to modify the IKEA Eneby speaker to take advantage of the TWS function of the CSRA64215 bluetooth module.

This mod will work on any CSRA64215 bluetooth amplifiers.
-----------------------------------------------------------------------------------
Some clarification:
0:45 - 1:04 IKEA went the hard way with the AUX and did not rout audio through the CSR chip. This would have been easier for IKEA.

1:05 IKEA did not enable aptX, they went for the lowest CBS coded. Should at least have followed AAC which is used by Apple.

1:45 The amps are actually turned off, and the bt chip might also be hard turned off. The PSU is still active so that will draw the bulk of the standby draw.
-----------------------------------------------------------------------------------
Dropbox link to a whole bunch of CSR programs and info:
https://www.dropbox.com/sh/dr26zzjrdeoujg1/AADybTSVhY8C020kOuDRva0ma?dl=0

This is the folder you need to navigate to find the correct software. Be aware that some modules have different ROM versions. ROM8,10,15 is included and should be all you need. If not it is possible to wright over the flash of the CSR chips to force the ROM you want. Might create a video about if there's a genuine interest for this.

Don't forget to check Darie's youtube channel!
https://www.youtube.com/channel/UCFdPfBvyIPexR5sM2roGr6w

Just comment if anything is unclear. I'll do my best to answer them.

Hope you enjoyed!

Видео Enabling Stereo Pairing on the IKEA ENEBY - Finishing Unfinished Business канала Erik S