LS Fire up for the 87 K5 blazer Build+Fitech Ultimate LS harness but have ECU Software trouble!
Firing up my 6L LS for my 87 K5 blazer Build and using a Fitech ultimate LS harness to do so, we have some software troubles and have to load the proper files onto the handheld + ECU but was a pretty easy fix, I will put the steps down below for those that prefer to read them.
ACDelco 213-4663 Professional Intake Manifold Temperature Sensor
https://www.rockauto.com/en/moreinfo.php?pk=1821902&jsn=3
"Steps to update your EFI system
1. Take attached file and extract files using file decompression software such as WinZip or WinRar
2. Plug in handheld to your computer using provided micro usb cable
3. Select “Open USB Mass Storage” on handheld to connect to computer
4. Once connected erase all file in handheld
5. Attach all provided files directly to handheld. “Not just the LS Handheld folder”
6. Once complete unplug and replug handheld to computer.
7. When handheld menu comes back up select down and hold down on joystick until screen says “Flash Erase”
8. Wait till handheld reboots and you are done with the computer
9. Take handheld to the vehicle and plug it in.
10. Go to Handheld Main Menu
11. Find Display Setup and change the ECU Programmer to "Show" then go back to Main Menu
12. Go to bottom of Main Menu and open ECU programmer – select the file that matches your engine, click start, let it finish, DO NOT EXIT!
13. Disconnect handheld power and reconnect
14. Go through Initial Setup and setup parameters for your application.
15. Make sure you click the joystick in, so it says SEND TO ECU. On Each line
16. Key off, wait 20 seconds for it to reset fully.
17. You are ready to go "
Buy merch @
https://lugnutsshop.com
Follow me @
https://instagram.com/tuques_n_tires?r=nametag
https://www.facebook.com/Tuques-N-Tires-106035991433024/
Not saying it’s the right way or the wrong way, its just the way I do it!
Видео LS Fire up for the 87 K5 blazer Build+Fitech Ultimate LS harness but have ECU Software trouble! канала Tuques N Tires
ACDelco 213-4663 Professional Intake Manifold Temperature Sensor
https://www.rockauto.com/en/moreinfo.php?pk=1821902&jsn=3
"Steps to update your EFI system
1. Take attached file and extract files using file decompression software such as WinZip or WinRar
2. Plug in handheld to your computer using provided micro usb cable
3. Select “Open USB Mass Storage” on handheld to connect to computer
4. Once connected erase all file in handheld
5. Attach all provided files directly to handheld. “Not just the LS Handheld folder”
6. Once complete unplug and replug handheld to computer.
7. When handheld menu comes back up select down and hold down on joystick until screen says “Flash Erase”
8. Wait till handheld reboots and you are done with the computer
9. Take handheld to the vehicle and plug it in.
10. Go to Handheld Main Menu
11. Find Display Setup and change the ECU Programmer to "Show" then go back to Main Menu
12. Go to bottom of Main Menu and open ECU programmer – select the file that matches your engine, click start, let it finish, DO NOT EXIT!
13. Disconnect handheld power and reconnect
14. Go through Initial Setup and setup parameters for your application.
15. Make sure you click the joystick in, so it says SEND TO ECU. On Each line
16. Key off, wait 20 seconds for it to reset fully.
17. You are ready to go "
Buy merch @
https://lugnutsshop.com
Follow me @
https://instagram.com/tuques_n_tires?r=nametag
https://www.facebook.com/Tuques-N-Tires-106035991433024/
Not saying it’s the right way or the wrong way, its just the way I do it!
Видео LS Fire up for the 87 K5 blazer Build+Fitech Ultimate LS harness but have ECU Software trouble! канала Tuques N Tires
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![The story behind the 57 chevy 210 wagon + little Blazer update](https://i.ytimg.com/vi/3ADC8uTsDBw/default.jpg)
![We finally get the LS & tranny in-between the frame rails of my 87 K5 Blazer part 19](https://i.ytimg.com/vi/5leGsjwp_NA/default.jpg)
![mid-week update! what's coming up + new project idea?](https://i.ytimg.com/vi/CEJdQm6qB4U/default.jpg)
![Reviving a Honda Big Red Barn find sitting 14+ years](https://i.ytimg.com/vi/Qj6zgW3v1EY/default.jpg)
![Turning big block chevy headers into LS headers to save $ for the C1 Chevelle street legal stock car](https://i.ytimg.com/vi/chF-Uk0zgFk/default.jpg)
![Full video out on the custom floor pan in the C1 Chevelle STREET LEGAL STOCK CAR build🤟 #stockcar](https://i.ytimg.com/vi/ggwlqCbapqk/default.jpg)
![Painting on a budget - The Old Man's 57 Chevy Wagon](https://i.ytimg.com/vi/s1xABp5WILg/default.jpg)
![The Public Enemy lives again! LS swapped blown alcohol fueled altered-how to make lake headers pt3](https://i.ytimg.com/vi/IW855KvCowo/default.jpg)
![The Public Enemy gets wired up! blown alcohol fueled altered drag car gets LS swapped part 2](https://i.ytimg.com/vi/MpMCLFCUkcU/default.jpg)
![New project coming out tomorrow! thank you guys for an awesome 2022!](https://i.ytimg.com/vi/uAzeYSLpFRY/default.jpg)
![Trading my lifted S10 on 35'' tires for a 1956 chevy 210 with a truck load of extra parts](https://i.ytimg.com/vi/1H2cJez2zFo/default.jpg)
![1956 chevy tri five project update - scored a mint southern frame and drove 2 hours to get it!](https://i.ytimg.com/vi/iwmzlomxbAk/default.jpg)
![1956 chevy Belair back on an original frame!](https://i.ytimg.com/vi/Iq6XMb97LEU/default.jpg)
![The Public Enemy-LS powered Drag altered makes first pass with new engine set up - part 4](https://i.ytimg.com/vi/HllikF-BGks/default.jpg)
![My GF's V8 98 TJ Jeep gets lifted! cooling system and exhaust buttoned up too](https://i.ytimg.com/vi/z0O36QPXpRU/default.jpg)
![Front quarter panel finished up on my 87 K5 Blazer Part 3](https://i.ytimg.com/vi/zCFMJT9w-sE/default.jpg)
![Little shop update - what's next for the blazer, Dads wagon getting worked on, more 3wheeler soon](https://i.ytimg.com/vi/mwUl_RZSMNM/default.jpg)
![Getting my STREET LEGAL STOCK CAR ready for HOT ROD POWER TOUR - 1968 C1 Chevelle is finished?](https://i.ytimg.com/vi/SQM6aOqlqcY/default.jpg)
![Getting My 1954 chevy pick up ready for HOT ROD POWER TOUR 2023 pt.1](https://i.ytimg.com/vi/czyVq0qa2b4/default.jpg)
![Shop Update! Big News!! Were putting Tuques N Tires on the road & heading to Toronto Motorama](https://i.ytimg.com/vi/qIy5nUIOC1A/default.jpg)
![Practicing my upholstery skill on the sun visors of my LS swap sleeper "Gramps"](https://i.ytimg.com/vi/gqinBRQAVwg/default.jpg)