The RIFF 600/900 3D printer 2 - skirts and z axis

The RIFF is a large DIY printer that can be built without spending a fortune. You can build a 300x600 or 300x900 version of this.
Custom files can be found on Printables. https://www.printables.com/model/1291703-the-riff-600900-large-3d-printer
CAD model: https://github.com/itesdahl/RIFF600-900

I encourage the use of second hand parts and will not provide any complete BOM listing specific new components.

I am not using the best components available. I am using whatever I already have or can get hold of second hand. No AWD, canbus, large controller boards or special stepper motors in this build.

Some facts about the build:
• Filament used: Isanmate ASA (black), Filamentum ASA (RED) and SUNLU PETG (black)
• Build plate 300 x 600 or 300x900 (using 2 or 3 pcs 300x300 heat beds)
• 2020 and 2040 extrusions
• SKR 1.4 turbo and SKR Pico controllerboards
• Radxa Rock 3C SBC
• MGN 12H rails/carriage on Y and X
• 12mm rods and bearings on Z
• Cartesian (the belts are a bit too long for corexy)
• Klipper
• Dual Y steppermotors
• Sensorless homing on X and Y
• Dragonburner with Sherpa micro
• 2 x 360W 24V power supplies (3x 360W 24V in the 900 version)

Timestamps:
00:00 Trollolo
00:18 More CAD
00:46 Skirts and covers
01:23 Scandinavian design vibes?
02:53 Custom parts
10:58 Heat bed assembly

#largeprinter #3dprint #DIY

Видео The RIFF 600/900 3D printer 2 - skirts and z axis канала V4 projects