How To Build Custom SEQUENTIAL LED Tail Lights - Nissan GTR

Almost nobody out there has really seen the process of custom building sequential LED lights. You may have seen the end result floating around Instagram and Facebook, but the process of going from stock lights to fully modified wiring, isn't really something you'll find a guide, or a kit to help you with.

If I were to break this down into steps, it'd look like this:

1. Open the lights
2. Trace down all power and ground wires for each LED
3. Strip, solder and heatshrink all ground wires, each with its own resistor
4. Connect all power wires together
5. Solder ribbon cable with connector for Ghozt sequencers
6. Reassemble and Reseal the Lights
7. Build Wire Harness to power Ghozt
Join the Community on Discord
https://discord.gg/NxDQU78
FOLLOW US ON SOCIAL MEDIA
IG: http://www.instagram.com/FlyRyde
FB: http://www.facebook.com/FlyRyde
Twitter: http://www.twitter.com/FlyRyde

Видео How To Build Custom SEQUENTIAL LED Tail Lights - Nissan GTR канала FlyRyde