How to build a slide out drawer / DIY / Land Rover Discovery 3 / LR3 LR4

#Landrover #LandroverDiscovery #LR3

In this video we show you how we constructed our full-size slide-out drawer for our Land Rover Discovery 3. In full detail. Hope you enjoy the video and thanks for watching,

Vera & Christian

See detailed material list below.
We will also post a link to the manufacturing drawings very soon - as soon as I have them finished. Please think about donating to our paypal account (https://paypal.me/LRTime) if you decide to download our drawings and copy the drawer. Please donate whatever you think is the correct amount. You can also write us then if you have detailed questions or if you need our help for customization. We sure will do the best we can. We assure you that the donation will be used to provide more content for our channel. Many thanks to all !!!

Bill of Material:
(partially affiliate links / bezahlte Werbung)

1 Set Junker heavy duty rails with latch, 1016 mm, 250 kg
https://amzn.to/3w3aIbY

1 laminated ply wood, 15 mm thick, water proof or epoxy coated (Siebdruckplatte)
cut to 1000 mm wide x 1060 mm long

20 Barrel nuts, M6 x 15, stainless
https://amzn.to/3qra332

20 Flat head screws, stainless, M16 x 16
https://amzn.to/2T46vYo

Aluminum angle material, 100x50x5 (look out for good quality, straight material with true corners)
2 x 920mm (sides, fastend to the car)
2 x 1060mm (sides, fastend to the drawer)

Aluminum angle material, 50 x 50 x 5
2 x 1010 mm for drawer front and rear

Lot M6 hex nuts
Lot M6 x 12 button head screw for mounting rails to drawer
1 x Loctite 242
Lot Spacer material as needed (we used aluminum, 40x1 mm cut to 40 mm pieces and drilled 10 mm through

4 pc. M8 x 40 socket head screw, stainless or galanized for mounting the drawer in the car
+ M8 washers

--- end of bill of material ---

Our favourite source for Discovery 3 information:
https://www.disco3.co.uk/forum/topic130062.html

Видео How to build a slide out drawer / DIY / Land Rover Discovery 3 / LR3 LR4 канала LR TIME