Putting the Turbo in Turbo Stang: Enough Boost To Produce 900+ HP - Horsepower S12, E19
It's phase two of the Turbo Stang project. After building a stout, fuel-injected motor, now it's time to build and install the turbocharger. The HorsePower team will show you how to make enough boost to produce 900+ horsepower. And, after they're finished putting the parts together, they'll test the results on their engine dyno. Then, it's time to drop it into their old, 1992 Mustang.
#turbo #mustang
Check out the PowerNation store for shirts, hats, and more: http://httpslink.com/lnk_f8a2aba5
Want to watch POWERNATION completely ad-free? Subscribe at the link below and receive the first month for just 99 cents:
http://httpslink.com/lnk_3d0d9e0c
Follow POWERNATION Everywhere:
http://www.powernationtv.com
http://instagram.com/powernationtv
http://facebook.com/powernationtv
PARTS USED IN THIS EPISODE:
Accufab,Inc.: Clamshell Clamp custom 90mm throttle body, Clamshell Clamp, 4" ferrule, IAC block off plate, throttle position sensor.
ARP: ARP Fastener Bulk Bins, pre-loaded with Stainless Steel and Black Oxide Fasteners, Washers, Nuts and more.
Bassani Manufacturing: 1 5/8" Equal length coated headers.
Bassani Manufacturing: 1 5/8" Equal length coated headers.
CP Pistons: Custom pistons, rings, wrist pins, and locks.
Crower Cams & Equipment Co., Inc.: One-piece pushrod 5/16" 8.350 length
Crower Cams & Equipment Co., Inc.: 4340 Forged steel crankshaft custom stroke, Maxi-Light #5 connecting rods, severe duty roller lifters, 8620 billet roller camshaft.
Crower Cams & Equipment Co., Inc.: Shaft mounted rocker arms 1.6 ratio
Custom Autosound: AM-FM Stereo, 240 Watts, USB Port for Flash Memory MP3/WMA Playback, Direct 10 CD Changer Control, Alpha Numeric id3 Display for MP3/WMA files, Electronic Tuning and Volume Control, 4 way Fader, Left Right Balance, Digital Clock, 2 Channel RCA Auxiliary Input for Satellite / iPod etc., 16 Pre-sets (12FM-4AM), 4 Channel RCA Pre-outs, Separate Bass and Treble, USA/Euro Tuner, Power Antenna Lead.
Denso: Iridium racing spark plugs.
Dynamic Test Systems / (DTS): Dyno cell and pressure transducer.
Hellion Power Systems: Turbonetics Turbocharger (88mm), 16 gauge Stainless Steel hot and cold parts (Mild Steel Headers), Spearco high flow air to air intercooler, High flow Turbonetics wastegate, Silicone hose kit, Stainless T-bolt clamp kit, 45 mm Blow-off valve, Oil feed and drain lines. All other necessary hardware to install kit.
High Performance Controls: The MFI system was designed from the ground up to provide a very simple and easy to understand tuning interface specifically for race only applications requiring very high fuel flow rates.
K&N: K&N Performance Gold Oil Filter
Loctite: Copper Anti-Seize
MSD Ignition: Digital 6-Plus Ignition Controller.
MSD Ignition: Pro Billet small cap distributor for 351W, ignition coil HVC-2, spark plug wire set 8.5mm Super Conductor.
Pace Performance: 350cid 290HP Base Engine, Complete 290/350 Crate Engine With Chrome Valve Covers & Air Cleaner, Complete 290/350 Crate Engine With Black Valve Covers & Air Cleaner, Complete 290/350 Crate Engine With Gray Valve Covers & Air Cleaner.
Robert Bosch LLC: High performance "blue top" fuel injectors 1680cc(160lb/hr).
Stage 8 Locking Fasteners: STAGE 8 locking fasteners
Trick Flow Specialties: Trick Flow CNC ported 225cc cylinder heads with 70cc combustion chambers. Performance head gaskets for use with o-rings, & an upper plenum kit.
World Products: Man O' War SBF engine block with 4.030 bore and 9.5" deck, Man O' War polished valve covers.
Видео Putting the Turbo in Turbo Stang: Enough Boost To Produce 900+ HP - Horsepower S12, E19 канала POWERNATION
#turbo #mustang
Check out the PowerNation store for shirts, hats, and more: http://httpslink.com/lnk_f8a2aba5
Want to watch POWERNATION completely ad-free? Subscribe at the link below and receive the first month for just 99 cents:
http://httpslink.com/lnk_3d0d9e0c
Follow POWERNATION Everywhere:
http://www.powernationtv.com
http://instagram.com/powernationtv
http://facebook.com/powernationtv
PARTS USED IN THIS EPISODE:
Accufab,Inc.: Clamshell Clamp custom 90mm throttle body, Clamshell Clamp, 4" ferrule, IAC block off plate, throttle position sensor.
ARP: ARP Fastener Bulk Bins, pre-loaded with Stainless Steel and Black Oxide Fasteners, Washers, Nuts and more.
Bassani Manufacturing: 1 5/8" Equal length coated headers.
Bassani Manufacturing: 1 5/8" Equal length coated headers.
CP Pistons: Custom pistons, rings, wrist pins, and locks.
Crower Cams & Equipment Co., Inc.: One-piece pushrod 5/16" 8.350 length
Crower Cams & Equipment Co., Inc.: 4340 Forged steel crankshaft custom stroke, Maxi-Light #5 connecting rods, severe duty roller lifters, 8620 billet roller camshaft.
Crower Cams & Equipment Co., Inc.: Shaft mounted rocker arms 1.6 ratio
Custom Autosound: AM-FM Stereo, 240 Watts, USB Port for Flash Memory MP3/WMA Playback, Direct 10 CD Changer Control, Alpha Numeric id3 Display for MP3/WMA files, Electronic Tuning and Volume Control, 4 way Fader, Left Right Balance, Digital Clock, 2 Channel RCA Auxiliary Input for Satellite / iPod etc., 16 Pre-sets (12FM-4AM), 4 Channel RCA Pre-outs, Separate Bass and Treble, USA/Euro Tuner, Power Antenna Lead.
Denso: Iridium racing spark plugs.
Dynamic Test Systems / (DTS): Dyno cell and pressure transducer.
Hellion Power Systems: Turbonetics Turbocharger (88mm), 16 gauge Stainless Steel hot and cold parts (Mild Steel Headers), Spearco high flow air to air intercooler, High flow Turbonetics wastegate, Silicone hose kit, Stainless T-bolt clamp kit, 45 mm Blow-off valve, Oil feed and drain lines. All other necessary hardware to install kit.
High Performance Controls: The MFI system was designed from the ground up to provide a very simple and easy to understand tuning interface specifically for race only applications requiring very high fuel flow rates.
K&N: K&N Performance Gold Oil Filter
Loctite: Copper Anti-Seize
MSD Ignition: Digital 6-Plus Ignition Controller.
MSD Ignition: Pro Billet small cap distributor for 351W, ignition coil HVC-2, spark plug wire set 8.5mm Super Conductor.
Pace Performance: 350cid 290HP Base Engine, Complete 290/350 Crate Engine With Chrome Valve Covers & Air Cleaner, Complete 290/350 Crate Engine With Black Valve Covers & Air Cleaner, Complete 290/350 Crate Engine With Gray Valve Covers & Air Cleaner.
Robert Bosch LLC: High performance "blue top" fuel injectors 1680cc(160lb/hr).
Stage 8 Locking Fasteners: STAGE 8 locking fasteners
Trick Flow Specialties: Trick Flow CNC ported 225cc cylinder heads with 70cc combustion chambers. Performance head gaskets for use with o-rings, & an upper plenum kit.
World Products: Man O' War SBF engine block with 4.030 bore and 9.5" deck, Man O' War polished valve covers.
Видео Putting the Turbo in Turbo Stang: Enough Boost To Produce 900+ HP - Horsepower S12, E19 канала POWERNATION
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Race Ready Roll Cage for the Turbo Stang - Horsepower S12, E20](https://i.ytimg.com/vi/gVWHQIXaTuo/default.jpg)
![Firing Up our 1,000 HP Turbostang Foxbody - Horsepower S13, E3](https://i.ytimg.com/vi/wi9SZnpzvag/default.jpg)
![Twin Turbo'ing a 2015 Mustang GT to Beat the Young Kids at the Strip - Engine Power S2, E16](https://i.ytimg.com/vi/xCWS6Qt8Js4/default.jpg)
![Building a 427 Stroker from a Ford Boss 351 Block - HorsePower S15, E6](https://i.ytimg.com/vi/xpWYlSaV80o/default.jpg)
![Building A High-Performance Ford Windsor To Drop In A 900+ HP Turbo Stang - Horsepower S12, E18](https://i.ytimg.com/vi/E5iZ1jMhHsY/default.jpg)
![The Original BigFoot Engine Build Part 1- Engine Power Season 2, Episode 4](https://i.ytimg.com/vi/lrI03FVYbvQ/default.jpg)
![Boosting and Tuning The Civic Rally Car Part 4 - Carcass S2, E15](https://i.ytimg.com/vi/DWtPsisgZSE/default.jpg)
![Unleashing a Boosted 347 Small Block Ford - Engine Power S2, E20](https://i.ytimg.com/vi/KYg8rQW0QQY/default.jpg)
![](https://i.ytimg.com/vi/18Dbpw-Xms8/default.jpg)
![Building A Race-Ready 5.0L Coyote From A Pile Of Parts - Engine Power S8, E10](https://i.ytimg.com/vi/RSaPOxXiyHM/default.jpg)
![Supercharging A GT's 4.6-Liter For An Extra 200 Horses- HorsePower S12, E13](https://i.ytimg.com/vi/tv7TrPxFGH8/default.jpg)
![Small Block Chevy Build Stage 3: 383 Becomes A 406 To Make Mega Horsepower - Engine Power S3, E14](https://i.ytimg.com/vi/fTr-DtdLhac/default.jpg)
![Building A 518HP Supercharged 350 Small Block - Engine Power S2, E6](https://i.ytimg.com/vi/CYAa5Dbkx1w/default.jpg)
![Tunnel Rammed Windsor Makes Big Power - Engine Power S7, E3.](https://i.ytimg.com/vi/rRlKrWxqJZ8/default.jpg)
![Scavenging Parts For A Small Block Ford Found In The Shop - Engine Power S7, E18](https://i.ytimg.com/vi/8QjXy_vKxbk/default.jpg)
![Squeezing More Power Out Of Our High-Performance 360 Mopar - Horsepower S13, E20](https://i.ytimg.com/vi/ZmbU03PI9As/default.jpg)
![351 Small Block Dyno Shootout: Windsor vs Cleveland - HorsePower S16, E11](https://i.ytimg.com/vi/0pLbKCBLXqk/default.jpg)
![Build a Kit Car with ONLY a Drill, Pop Rivets, and Rattle Can Paint - Engine Power S2, E10](https://i.ytimg.com/vi/DCAY0w5v7sQ/default.jpg)
![Chevy S10 Gets An LT1 Powerplant - Trucks! S1, E6](https://i.ytimg.com/vi/o0l5Z3BJepw/default.jpg)
![Tearing Down a Pair of 351 Small Blocks: Windsor vs Cleveland - HorsePower S16, E10](https://i.ytimg.com/vi/x5e5-5KsTQ4/default.jpg)