How to Remove A/C blower Motor Fan and Resistor from 2007 Mazda 3

here is a video i took after i finished removing the air condition blower motor from a 2007 Mazda 3. this was a royal pain in the butt! the service manual is a total lie, it doesn't tell u all that you have to remove to get this thing out.

u have to remove both front seats for room.
steering column
brake pedal assembly
gas pedal
knee guard
lower center kick panel
lower right kick panel

passenger side

remove glove box,
lower left kick panel
lower center kick panel
then unscrew 3 hard to reach screws to remove RECIRC box

back to drivers side

unhook blower motor snorkel
release circle clip that holds fan in place
remove really hard to reach screws for resistor
unplug hard to reach blower motor plug.

back to passenger side.

pull blower motor out.
by the way . u need someone else to hold the blower motor when reattaching the white circle clip (white plastic ring that locks the motor in place)

i hope this helps someone that was tryin to do this.

Видео How to Remove A/C blower Motor Fan and Resistor from 2007 Mazda 3 канала DrWonderEyes