IS300 Gets a Standalone (HOW-TO on factory harness)

https://hournineracecraft.com/IS300.html

Other helpful youtube videos:
Manual IS300 with Auto ECU: https://youtu.be/OxPfp2tFaFE
Homemade R35 coil bracket: https://youtu.be/Y04VSF0KygM
IS300 ECU relocation(part 1): https://youtu.be/kszMgUkN0WE
IS300 ECU relocation(part 2): https://youtu.be/FZLBPGd_Si4
IS300 ECU relocation(part 3): https://youtu.be/-tK__e23wSo
IS300 build plans: https://youtu.be/r8VhPxCh81g

Chapters in this video
00:00 Intro
03:47 Purpose of this video
05:51 What else to buy?
10:41 My engine's differences
16:12 IS300 wire pinout
17:37 how IS300 INJ/IGN is wired
18:44 Ignition power move
22:05 Injector power move
24:13 VVTi solenoid
26:11 Cut sensor ground to engine
29:43 Cam/Crank(-) signal rewire
31:52 Mass Air Flow replacement
33:34 Coolant Temp 1k pullup
34:34 TPS, depin pin 3
36:13 Knock sensor change
38:30 Recapping wire changes
43:44 hand-drawn relay wiring
53:18 Wiring completed
1:08:02 Haltech config and START

Видео IS300 Gets a Standalone (HOW-TO on factory harness) канала Legit Racecraft