Installing the Engine in the Big Flathead, Harley Davidson Project Bike
The Chassis is pretty well mocked up now, so, it's time to install the engine before the bike goes over to have the gas tanks fitted. Maybe we'll do the pipes at the same time. This is still "mock-up" procedures, so things might change a little here and there. These are all developments in the building of the Harley Davidson Flathead 80 Project Bike.
Видео Installing the Engine in the Big Flathead, Harley Davidson Project Bike канала Pacific Mike
Видео Installing the Engine in the Big Flathead, Harley Davidson Project Bike канала Pacific Mike
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Cams and Stroked Flywheels and More Stuff For The Project Bike](https://i.ytimg.com/vi/ePAbza1EnjY/default.jpg)
![We're Here and Mounting the Front Brake On the Big Flathead Project Bike](https://i.ytimg.com/vi/RW-9CX2Vdms/default.jpg)
![Lap The Valves On a Harley Davidson Shovelhead](https://i.ytimg.com/vi/3BLQl7NwcoU/default.jpg)
![A Lot of People Asked For It, So Here's What My Harley Davidson Knucklehead Sounds Like](https://i.ytimg.com/vi/6bpX9bj1-ig/default.jpg)
![Closing Up the Primary on the Harley Davidson Evo Stroker](https://i.ytimg.com/vi/j3PHQMhg2pw/default.jpg)
![Harley Davidson Shovelhead Hydraulic Valve Lifters](https://i.ytimg.com/vi/pVUibQDkX44/default.jpg)
![Setting the End Play and PackingThe Bearings On The New Wheel](https://i.ytimg.com/vi/_XnEaiR3Hsg/default.jpg)
![Step 6 One Funky Carburetor from the Panhead](https://i.ytimg.com/vi/HpIHMVsDkB8/default.jpg)
![THE ONLY KNOWN RECALLED HARLEY VL!](https://i.ytimg.com/vi/j2ZPBiRgU-Q/default.jpg)
![Removing the Rear Rocker Box On An Evo Fatboy](https://i.ytimg.com/vi/tnXIy0-rcJ4/default.jpg)
![Handmade Headlight Bracket For Big Flathead Harley Davidson Project Bike](https://i.ytimg.com/vi/PRKaRC_HQTY/default.jpg)
![Truing The New Wheel For The Big Flathead Project Bike](https://i.ytimg.com/vi/5jNpUgQx-ZM/default.jpg)
![Servicing1952 Harley Transmission and Details](https://i.ytimg.com/vi/6AyrmYUgepM/default.jpg)
![A New Set of Ignition Points For a Harley Davidson Panhead](https://i.ytimg.com/vi/sLt93ViwDpU/default.jpg)
![Rocker Arm Endplay on a Shovelhead](https://i.ytimg.com/vi/GxgOrzoG5k8/default.jpg)
![Changing Oil and Filter on a Harley Davidson Panhead](https://i.ytimg.com/vi/2qkWU8ftsyc/default.jpg)
![Installing Cam & continuing Into Next Video Part A](https://i.ytimg.com/vi/nGTxeRVPCzY/default.jpg)
![Mounting the Oil Tank,and Fender on the 1940 Harley Davidson Project Bike](https://i.ytimg.com/vi/wv91oD-vcTE/default.jpg)
![Installing Evo, New Cam Bearing & Seal](https://i.ytimg.com/vi/MuIpIQ1O7Q8/default.jpg)
![Part 2 of Changing Fluids on a Harley Twin Cam Dyna](https://i.ytimg.com/vi/WWr53a8p7Dc/default.jpg)