Загрузка страницы

This Is The BEST TOOL For Glued-Down Flooring! (Carpet Removal/Floor Adhesive Removal)

AFFILIATE TOOL LINKS:
QEP 14” FLOOR SCRAPER
https://amzn.to/3xVHgXC
8” HARD FLOOR SCRAPER
https://www.homedepot.com/p/QEP-7-in-Wide-Floor-Scraper-and-Stripper-with-48-in-Handle-and-Foot-Peg-75006Q/100193678
ABN 8” RAZOR SCRAPER
https://amzn.to/3twRgmA
UTILITY KNIFE
https://amzn.to/33pqbHp

(These are affiliate links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU. We greatly appreciate the support!)

FOLLOW US ON INSTAGRAM:
https://www.instagram.com/thehonestcarpenter
FOLLOW US ON LINKEDIN:
https://www.linkedin.com/in/thehonestcarpenter
I recently had to take up the glued-down carpet in my new shop space. This is never a pleasant task--but I couldn't believe how difficult it was to remove this particular carpet!

The original adhesive was still very effective in parts of the floor. Removing the carpet and getting down to something like the original slab took several hours over two days.

It's best to cut carpet into smaller squares with a sharp utility knife (carefully!) Pull carpet sections up from two sides, if possible, with a sawing motion.

When carpet or flooring sticks this badly, though, you need to bring tools into the picture. An 8" hard scraper was the best thing I found for a carpet this stubborn. You can swipe it under the edges with speed and force, and slowly get a portion of the carpet lifted.

Once the carpet was pulled up around the room, I then had to deal with at least some of the adhesive still down on the floor. Sometimes, if dry and brittle, this adhesive can be scraped up with an 8" razor scraper. But, this adhesive was still too stubborn.

In the end, I had to use a low-VOC flooring stripper. I didn't document this much, because it's a dangerous chemical process. (I'll work with a flooring company in the future for this.)

But, it still makes a horrible mess. In this case, I found that a 14" hard scraper was better to cover more surface area. I added sawdust to the floor at times just to cut down on the residue left behind.

In the end the shop got cleared and everything swept out the door. It was tedious, but I'm not ready for the rest of the shop build.

Thanks for watching! Be sure to visit us at The Honest Carpenter website:
www.thehonestcarpenter.com

Видео This Is The BEST TOOL For Glued-Down Flooring! (Carpet Removal/Floor Adhesive Removal) канала The Honest Carpenter
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
9 мая 2021 г. 3:00:03
00:05:12
Яндекс.Метрика