Threading Guide for 5 Thread Overlock (Part 2/5) - ABC Sewing Machine

Watch our new and improved threading guide for the Pegasus MX3216 5 Thread Overlock: https://youtu.be/qRf_EPHKZc4
This video is a guide for threading a 5 Pegasus EX Overlock/Serger Upper Looper.

Check our website out http://abcsewingmachine.com/

Transcription:

Ok, Next, we’re gonna do the second thread. This one is for the upper looper. So, you want to do the same thing, put it in to the one right to the first one, come down in to the metal frame. First hole, second hole, same thing like you did right here. Second hole, put it to the hole, make sure it goes to the right side, right side and then comes around down the guide and down to the left hole.

After it comes down to left hole, it’s gonna go past that 1st guide that you went to and it just go right past into this guide right here. And right here there’s 3 pieces, so you have to get in the guide and you could turn the pulley by hand to bring it down or up. So, it’s gonna go inside the guide, right here in the middle guide and then back to the left. Gonna go up, one more guide right here, and then from here, it’s gonna go to the upper looper.

So, if you move this by hand, that right there is the upper looper, the small looper. This one, there is a little hole on the right side, you put it in from right to left and you’re gonna put it from front to back. So, right to left then front to back. And then after that, you want to pull the thread so it comes out to the back.

So, I’m gonna show you one more time. The frame, to the frame, to the thread guide, down that second guide, around towards the right side - like I said, you have to make sure it goes inside the discs - so down the right side, into the hole, second hole, the first guide right here on the bottom, first guide, secondguide, third guide, first, second, third. So, when you move it by hand, the guides will kinda meet right there, just like that. First guide, to the second guide, to the third guide, goes up, one more guide, and then into the looper, so, when it goes to the looper, like I said, left to right and then front to back and then pull out the thread to the back.

Видео Threading Guide for 5 Thread Overlock (Part 2/5) - ABC Sewing Machine канала ABC Sewing Machine