Ep 5, Twin Turbo P71 Crown Victoria, Oil System, Scavenge Pump, Punch and Tap Oil Pan, Police Car

Today I get the oil system done for the turbo's and successfully "punch and tap" the oil pan for the oil return line from the turbowerx scavenge pump. Tutorial on "Punch and Tap" method at end of video.

Starting out with one of the smoothest running 4.6 2 valve engines I've ever seen, we start the tear down and mounting of the the twin rear mount turbo's on our sleeper crown vic. My goal is to hit 400hp at the rear wheels (stock at the rear is around 200-215) on pump gas w/ less than 8psi boost. The complete parts list will be updated on each episode.
PARTS USED SO FAR....

Turbo kit used (qty 2)---https://amzn.to/3CzrXqb
Exhaust hangers---https://amzn.to/34xgoTW
Mandrel Bend 2.25"---https://amzn.to/3Iac2A2
2" Turbo Ducting (between the turbos)---https://amzn.to/3CGuaR1
90* 3" elbow (will be replaced w/ 45* boot) https://amzn.to/3Je50LV
T3-T4 Turbo exhaust flange (input) https://amzn.to/3JfPK17
Deatschwerks 60 lb injectors EV14---https://deatschwerks.com/products/18u-00-0060-8?_pos=4&_sid=bae0a45f6&_ss=r
NGK TR7IX Spark plugs---https://amzn.to/3JlGg4h
Coils (ACDelco)---https://amzn.to/3KUUQQU
Coils (MSD that one went bad in 5k)---https://amzn.to/3Jo3KWu
Rubber coated zip ties 12" ---https://amzn.to/3qng2XA
Rubber coated zip ties 8" ---https://amzn.to/3Is3kNF
TurboWerx Base Model Spartan High-Temperature Electric Oil Scavenge Pump ---https://amzn.to/3qpLULj

Oil System Fittings (I used JP fittings, however these are equivalent and more available)

RETURN LINES
*This kit comes w/ all the fittings and 20' hose needed EXCEPT additional needed fittings listed below https://amzn.to/3JyTxqo
*8an 180* (turbo's) qty 2 ---https://amzn.to/3wpSfdJ
*8an to 1/4" NPT (oil pan) ---https://amzn.to/3Iv2Beq
*8an to 3/8" NPT (scavenge pump) qty 2 ---https://amzn.to/3JvoPhW

SUPPLY LINES
*1/4 Brake hardline roll ---https://amzn.to/3JwGuFT
*1/4 to 1/8 npt compression fitting (turbo side) qty 2---https://amzn.to/3D6ZEjh
*1/4 to 1/4 npt compression fitting (engine side) ---https://amzn.to/3Jtakv6
SPECIALTY TOOLS USED SO FAR....

EP 1 -Dewalt Rod Cutter (all thread technically)---https://amzn.to/3Kzx50l
EP 1-5 -Exhaust cutter---https://amzn.to/3CFr0ge
EP 2? -Body saw for curving insert cuts---https://amzn.to/3wap8Ld
EP 5 -Tap for oil pan -https://amzn.to/3Jvjd7k
REFERENCE VIDEOS---

Exhaust Expander How Too Video---https://youtu.be/SMGgGlCsjFQ

Видео Ep 5, Twin Turbo P71 Crown Victoria, Oil System, Scavenge Pump, Punch and Tap Oil Pan, Police Car канала Death Toll Racing