- Популярные видео
- Авто
- Видео-блоги
- ДТП, аварии
- Для маленьких
- Еда, напитки
- Животные
- Закон и право
- Знаменитости
- Игры
- Искусство
- Комедии
- Красота, мода
- Кулинария, рецепты
- Люди
- Мото
- Музыка
- Мультфильмы
- Наука, технологии
- Новости
- Образование
- Политика
- Праздники
- Приколы
- Природа
- Происшествия
- Путешествия
- Развлечения
- Ржач
- Семья
- Сериалы
- Спорт
- Стиль жизни
- ТВ передачи
- Танцы
- Технологии
- Товары
- Ужасы
- Фильмы
- Шоу-бизнес
- Юмор
AP35 Ultrapure Cleanroom Fogger
In 2001 portable cleanroom foggers were introduced and now the AP35 LN2 fogger is a significant advancement with 3X more ultrapure fog volume, adjustable fog volume control, adjustable airflow control and wireless remote control. The AP35 uses liquid nitrogen and deionized water, sterile water or Water for Injection to create a very dense, ultra pure fog to provide superb visualization of airflow patterns, flow direction, turbulence and dead zones for up to 70 minutes in clean rooms, ISO suites, sterile rooms, barrier isolators and medical rooms. The AP35 provides 5 cubic meters ultrapure fog per minute with about 571 ml fog density each minute minute, superb for visualizing airflow and turbulence. More than 20-30 feet of air flow visualization is provided in the clean room. 3D airflow modeling is accomplished very well and no contamination is created and no clean up of any kind is required after visualizing the airflow. The AP35 ultrapure LN2 fogger supports airflow visualization guidelines as defined by USP797 Insitu Airflow Analysis, ISO 14644-3, B7; Federal Standards 209E and its replacement ISO Standard 14644-1 and 14644-2.
Compare Foggers at https://www.appliedphysicsusa.com/clean_room_foggers/
Request Quote at https://www.appliedphysicsusa.com/contact-us/
AP35 Ultrapure Fogger generates ≈ 5.0 cu. meters fog per minute, ≈ 571 ml fog density per minute, ≈ 70 minutes operation, ≈ 20 – 30 feet visual fog, 2 fog outputs.
The AP35 Ultrapure Nitrogen Fogger is superb in supporting video and visual fog requirements with a very dense ultrapure fog output. The AP35 provides 3X more fog volume, 2X more fog density and 2X more visual fog distance than the competitive, smaller ultrapure fogger. The AP35 is a superb fogger for airflow visualization needs in pharmaceutical ISO suites and semiconductor clean rooms.
Ultrapure foggers are compared in fogger performance by determining Fog Density over time.
A Ultrapure Nitrogen Fogger uses LN2 and De-ionized Water or WFI water to generate a very dense, ultrapure fog for the best visualization of airflow patterns, direction, turbulence, dead zones and airflow velocity in clean rooms, ISO suites, sterile rooms, barrier isolators and medical rooms. Adjustable fog output is provided from 2 to 5 CUBIC METERS of ultrapure fog per minute with a typical 20-30 feet of visualization of turbulence in the airflow and around equipment. 3D airflow modeling is superb with the AP35 Ultrapure fogger. No contamination is created and no clean up of any kind is required after fog process is complete. High fog density is needed to visualize airflow and turbulence in large cleanrooms. Fog density affects how visual the airflow is and controls the distance the airflow is visible to your eye or to a video camera. To determine fog density, the liquid volumes of the fogger is needed, combined with the operating time of the fogger. Which ultrapure Nitrogen fogger is best for the cost? The AP35 uses 35 L of LN2 and 5L of water. 40 total liters liquid generating dense fog for about 70 minutes. Since all liquids are consumed, the Fog Density calculation is: 40 liters / 70 minutes operation or about 571 ml per minute fog density. Competitive foggers convert less than 10L of LN2 and under 3 L of DI Water, which calculates the fog density at about 250 ml fog density per minute during a 25 to 35 minute operation. The AP35 Ultrapure Fogger produces twice the fog density, twice the visual airflow distance and 3.5 times the fog volume as compared to other ultrapure foggers, and the cost of the AP35 is nearly the same as other competitive LN2 foggers.
Nitrogen Fog Generator, Ultrapure, Clean Room Portable Fogger, 5 cubic meters ultrapure fog per minute
Compare Foggers at https://www.appliedphysicsusa.com/clean_room_foggers/
Request Quote at https://www.appliedphysicsusa.com/contact-us/
Contact AP: Sales@AppliedPhysicsUSA.com Tel #: 720-635-3931, Cel #: 303-999-6837 Skype: ap-jturner
Facebook- https://facebook.com/Applied-Physics-USA
Twitter- https://twitter.com/appliedphysics7
Instagram- https://www.instagram.com/applied_physics_
Видео AP35 Ultrapure Cleanroom Fogger канала Applied Physics Corp.
Compare Foggers at https://www.appliedphysicsusa.com/clean_room_foggers/
Request Quote at https://www.appliedphysicsusa.com/contact-us/
AP35 Ultrapure Fogger generates ≈ 5.0 cu. meters fog per minute, ≈ 571 ml fog density per minute, ≈ 70 minutes operation, ≈ 20 – 30 feet visual fog, 2 fog outputs.
The AP35 Ultrapure Nitrogen Fogger is superb in supporting video and visual fog requirements with a very dense ultrapure fog output. The AP35 provides 3X more fog volume, 2X more fog density and 2X more visual fog distance than the competitive, smaller ultrapure fogger. The AP35 is a superb fogger for airflow visualization needs in pharmaceutical ISO suites and semiconductor clean rooms.
Ultrapure foggers are compared in fogger performance by determining Fog Density over time.
A Ultrapure Nitrogen Fogger uses LN2 and De-ionized Water or WFI water to generate a very dense, ultrapure fog for the best visualization of airflow patterns, direction, turbulence, dead zones and airflow velocity in clean rooms, ISO suites, sterile rooms, barrier isolators and medical rooms. Adjustable fog output is provided from 2 to 5 CUBIC METERS of ultrapure fog per minute with a typical 20-30 feet of visualization of turbulence in the airflow and around equipment. 3D airflow modeling is superb with the AP35 Ultrapure fogger. No contamination is created and no clean up of any kind is required after fog process is complete. High fog density is needed to visualize airflow and turbulence in large cleanrooms. Fog density affects how visual the airflow is and controls the distance the airflow is visible to your eye or to a video camera. To determine fog density, the liquid volumes of the fogger is needed, combined with the operating time of the fogger. Which ultrapure Nitrogen fogger is best for the cost? The AP35 uses 35 L of LN2 and 5L of water. 40 total liters liquid generating dense fog for about 70 minutes. Since all liquids are consumed, the Fog Density calculation is: 40 liters / 70 minutes operation or about 571 ml per minute fog density. Competitive foggers convert less than 10L of LN2 and under 3 L of DI Water, which calculates the fog density at about 250 ml fog density per minute during a 25 to 35 minute operation. The AP35 Ultrapure Fogger produces twice the fog density, twice the visual airflow distance and 3.5 times the fog volume as compared to other ultrapure foggers, and the cost of the AP35 is nearly the same as other competitive LN2 foggers.
Nitrogen Fog Generator, Ultrapure, Clean Room Portable Fogger, 5 cubic meters ultrapure fog per minute
Compare Foggers at https://www.appliedphysicsusa.com/clean_room_foggers/
Request Quote at https://www.appliedphysicsusa.com/contact-us/
Contact AP: Sales@AppliedPhysicsUSA.com Tel #: 720-635-3931, Cel #: 303-999-6837 Skype: ap-jturner
Facebook- https://facebook.com/Applied-Physics-USA
Twitter- https://twitter.com/appliedphysics7
Instagram- https://www.instagram.com/applied_physics_
Видео AP35 Ultrapure Cleanroom Fogger канала Applied Physics Corp.
Комментарии отсутствуют
Информация о видео
4 ноября 2019 г. 19:51:58
00:05:08
Другие видео канала




















