DIY Utility Trailer Gate Lift Assist System - Lift That Ramp Easy

Please consider hitting that thumbs up and big red support button for a small YouTube content creator.
In this video I show you have I built a trailer gate / ramp lift assist system for $66 inside the frame of my trailer. Super clean looking and easy for the average do it yourselfer.
Parts List is right at $66 after tax.
2 - Garage Door Springs (80#-100# Recommended for most utility trailers) $35 from Amazon
2 - 3/8"x4" Bolts $1.04 Lowes
2 - 3/8"x3" Bolts $.80 Lowes
4 - 3/8" Nylon Locking Nuts $.72 Lowes
4 - 3/8"x1½" Washers $.72 Lowes
4 - 3/8"x1" Nylon Washers $.56 Lowes
4 - ¼"x2½" Bolts $1.21 Lowes 3 Pack
4 - ¼" Nylon LOcking Nuts $.48 Lowes
16 - ¼"x5/8" Washers $2.40 Lowes
1 - ¼"x1" Bronze Roller Bearing / Machine Bushing $2.63 Lowes
2 - 3/8"x½"x1½" Steel Spacers approximately $3 from Lowes
8 - ¼"x3/8"x3/4" Steel Spacers approximately $8 from Lowes
2 - 47" Steel Cables (This will vary depending on spring length and ramp length) Make from cables that come with springs. Usually 3/32" or 1/8" Diameter. - $5 for four cable ferrules and two thimbles.
1½" Polycarbonite tubing (not needed but I'm using it as a noise and friction dampener)Free junk lying around.
Thanks for watching.

Видео DIY Utility Trailer Gate Lift Assist System - Lift That Ramp Easy канала TheManCaveVideo