Westone X390 Pantera CB - Tribute Guitar Build - Taking Control over the Control Cavity Templates
Join me while I struggle to make the Control Cavity and Cavity Cover plate templates for the Westone X390 Pantera CB tribute Guitar Build.
In part 3 of this guitar building series I show and try to explain how I design and make the templates for the control cavity for this guitar by hand.
Usually designing and making templates for the control cavity isn't a big deal, but due to the curvature of this guitar body it took me some effort to figure out how I was going to do this one.
Recording this very detailed video took me some effort and I hope it provides some useful information as I get a lot of questions about how I make my templates.
This video turned into a very detailed tutorial on how to make guitar templates by hand using a couple of very basic tools.
To learn more about the design used in this video check out part 1:
https://youtu.be/LN01cwNqZyw
The Incra protractor I'm using:
https://amzn.to/3vuCJtV - Incra Protractor (Imperial)
https://amzn.to/3tlEKXx - Incra Protractor (Metric)
Interested in more guitar building related videos?
Check out my channel for more tips and tricks, tool reviews and guitar builds for the (beginner) luthier in a small workshop.
Unquendor Guitars :
Website: https://www.Unquendor-Guitars.nl
Merchandise : https://teespring.com/stores/unquendor-guitars-goodies
Instagram: https://www.instagram.com/unquendor_guitars/?hl=nl
Facebook: https://www.facebook.com/Unquendor/
Chapters:
0:00 Intro
0:35 The Challenge
2:02 Body cross section
9:18 Control Cavity Design
14:59 Mistakes were made
19:38 Making the Control Cavity Template
22:25 Cover Plate Design
25:50 Making the Cover Plate Template
28:18 Cover Plate Recess
32:00 Router Guide bushes Trick
38:38 Making the Recess Template
41:00 Testing the Templates
42:50 Perfect Fit
43:30 Outro
Get epic music for your content and support me and my channel at Epidemic-Sound using this link:
https://www.epidemicsound.com/referral/jhrv20/
Do you like the tools I'm using and want to support me?
Here are some Amazon affiliated links that help you get yours and support me at the same time.
https://amzn.to/3vuCJtV - Incra Protractor (Imperial)
https://amzn.to/3tlEKXx - Incra Protractor (Metric)
https://amzn.to/3cw7pm1 - Triton TRA001 Router
https://amzn.to/38HhMlW - Triton MOF001 Router
https://amzn.to/3qQJvqz - Bosch PBD40 Pillar Drill
https://amzn.to/3cOe8rN - Alpen Forstner bits
Or check out all my tool Suggestions in my Amazon store:
https://www.amazon.com/shop/unquendorguitars
Видео Westone X390 Pantera CB - Tribute Guitar Build - Taking Control over the Control Cavity Templates канала Unquendor Guitars
In part 3 of this guitar building series I show and try to explain how I design and make the templates for the control cavity for this guitar by hand.
Usually designing and making templates for the control cavity isn't a big deal, but due to the curvature of this guitar body it took me some effort to figure out how I was going to do this one.
Recording this very detailed video took me some effort and I hope it provides some useful information as I get a lot of questions about how I make my templates.
This video turned into a very detailed tutorial on how to make guitar templates by hand using a couple of very basic tools.
To learn more about the design used in this video check out part 1:
https://youtu.be/LN01cwNqZyw
The Incra protractor I'm using:
https://amzn.to/3vuCJtV - Incra Protractor (Imperial)
https://amzn.to/3tlEKXx - Incra Protractor (Metric)
Interested in more guitar building related videos?
Check out my channel for more tips and tricks, tool reviews and guitar builds for the (beginner) luthier in a small workshop.
Unquendor Guitars :
Website: https://www.Unquendor-Guitars.nl
Merchandise : https://teespring.com/stores/unquendor-guitars-goodies
Instagram: https://www.instagram.com/unquendor_guitars/?hl=nl
Facebook: https://www.facebook.com/Unquendor/
Chapters:
0:00 Intro
0:35 The Challenge
2:02 Body cross section
9:18 Control Cavity Design
14:59 Mistakes were made
19:38 Making the Control Cavity Template
22:25 Cover Plate Design
25:50 Making the Cover Plate Template
28:18 Cover Plate Recess
32:00 Router Guide bushes Trick
38:38 Making the Recess Template
41:00 Testing the Templates
42:50 Perfect Fit
43:30 Outro
Get epic music for your content and support me and my channel at Epidemic-Sound using this link:
https://www.epidemicsound.com/referral/jhrv20/
Do you like the tools I'm using and want to support me?
Here are some Amazon affiliated links that help you get yours and support me at the same time.
https://amzn.to/3vuCJtV - Incra Protractor (Imperial)
https://amzn.to/3tlEKXx - Incra Protractor (Metric)
https://amzn.to/3cw7pm1 - Triton TRA001 Router
https://amzn.to/38HhMlW - Triton MOF001 Router
https://amzn.to/3qQJvqz - Bosch PBD40 Pillar Drill
https://amzn.to/3cOe8rN - Alpen Forstner bits
Or check out all my tool Suggestions in my Amazon store:
https://www.amazon.com/shop/unquendorguitars
Видео Westone X390 Pantera CB - Tribute Guitar Build - Taking Control over the Control Cavity Templates канала Unquendor Guitars
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Westone X390 Pantera CB - Tribute Guitar Build - Guitar (Re-)Design by hand.Een 'Custom Guitar Experience' Deel 6 (NL)Making a Router Table (Part 3); an Unquendor Guitars weekly update!!Building the Celtic Sonea Guitar - Part 9 - Hard Wax Oil FinishA Custom Guitar Experience (Part 3)Een "Custom Guitar Experience" voor Present Danger's Thijs de Jong (Dutch) (Deel 1)Building the Celtic Sonea Guitar - Part 6 - Making the Guitar BodyDo I see you at the Bridge Guitar Festival 2024 in Eindhoven?Did Unquendor Guitars just reach 10K?? | Thank you all very much!!Setting up and Furnishing the new Workshop using mostly materials from the old shed.I had to destroy the old workshop and rebuild a brand new one!Farne Nessa Demo RonTuner holes & Headstock logo inlay - Building a Single Cut model Guitar (Part 6)Making Control cover plates & Gluing in the neck - Building a Single Cut model Guitar (Part 10)"A Custom Guitar Experience" LIVE Event @ The Guitar Factory - Oss (Dutch)Phoenix Rising - Guitar Building Series Episode 6 - Making fretboards and orange binding.Carving Guitar Necks, Doing Inlays and Unboxing Parts - A week in the Unquendor Guitars WorkshopAn Improvised Guitar ShowBuilding a Custom Guitar - Part 3 "Finish & Final Assembly"Unboxing Guitar Parts & Tools for ChristmasWestone X390 Pantera CB - Tribute Guitar Build - Fretboard Radius and Inlays