Custom supercritical CO2 chamber with easy-to-use lid clamp
I built another supercritical CO2 chamber for extraction and drying. This time, I wanted a chamber that was easier to open and close, and could be expanded to larger volumes with the same closure system. The chamber is built from 2" OD .25" wall stainless steel, and I welded a plug into one end and a ring with O-ring gland onto the other.
Видео Custom supercritical CO2 chamber with easy-to-use lid clamp канала Applied Science
Видео Custom supercritical CO2 chamber with easy-to-use lid clamp канала Applied Science
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
A close look at supercritical carbon dioxide CO2Supercritical CO2 extraction of cinnamon, coffee, and vanilla with dry ice16oz Operating Tutorial MedXtractor cannabis oil CO2 extractorMake vacuum pre-loaded spherical air bearings without special toolsSupercritical CO2 in a Glass Tube?Homemade long Bar clampsCO2 Supercritical Extraction of Lavender Oil Instructions - http://www.StepExtraction.comGoing supercritical.How to run a 1lb Apollo extractorTHE MINI CLOSED LOOP EXTRACTORCaffeine extraction from green coffee with supercritical CO2Making patterned mirrors and ITO glass with a thermal evaporatorMaking Liquid Nitrogen From Scratch!Waterjet cutter built with a cheap pressure washerHow to operate 16oz MedXtractor cannabis oil CO2 extractor short version tutorialDrill through anything (conductive) with Electrical Discharge MachiningElectron microscope animation: Carbon nanotubes pulled into threadDIY Wood Bar Claps For under $5.00Making Silicon Tetrachloride