Harbor Freight powered Giraud Tri-Way Trimmer with DIY stand.

I couldn't find much information about how people had their trimmers mounted in the vertical position, so I made a simple stand and I'm so pleased I wanted to share it. I understand not everyone has access to a welder, but the same results can be achieved with a wooden 4x4 and a base.

Required items.

Giraud Tri-Way Trimmer.
Www.giraudtool.com

Harbor Freight 6" Bench Grinder.
https://www.harborfreight.com/6-in-bench-grinder-with-gooseneck-lamp-61748.html

1/2"x3/8" coupler.
https://www.amazon.com/dp/B005L69UPE/ref=cm_sw_r_cp_apa_i_xjjkFb0CPQ33A

18" 2.5"x2.5" 1/4 wall steel tube.

8"x10" 1/4" thick steel plate.

Drill, 5/16 drill bit.

9/64 Allen wrench

Hardware
Two 3.5" 1/4"bolts, two 1/4" washers, two 1/4" nuts.

Angle grinder (not required but helpful to remove the opposite aide arbor and threads on the work side. MAKE SURE YOU CUT THE CORRECT ARBOR OFF! The tool needs to turn counter-clockwise as you look at it, otherwise you will ruin your blades.

Видео Harbor Freight powered Giraud Tri-Way Trimmer with DIY stand. канала Rob Goose