MACHINE SHOP TALK - Episode #30: Dealing With a New Engineer / Should You Hammer a Part in the Vise?
Join Ian in this episode of shop talk as he breaks down two hot topics from the Practical Machinist forum.
When difficulties between machinists and engineers arise, there are different ways approach the situation. Ian walks through a couple of the different options and even offers his own opinion. Let us know in the comments any similar experiences you have had, and how it was solved or what you learned from it. You can grab the forum thread here: https://www.practicalmachinist.com/vb/general/convincing-new-engineer-his-idea-waste-time-392857/.
The second forum discussion may seem simple but it drove quite the conversation. The big debate: Do you hammer your part into the vise? There are many machinists who find this to be standard practice, and many machinists who would argue this to be terrible practice. What do you think? Let us know in the comments section below! Grab the second forum thread here: https://www.practicalmachinist.com/vb/general/dead-blow-hammers-parts-vises-333861/
Are you a member on the Practical Machinist forum? If you are, share a thread you think Ian should discuss by dropping the link in the comments!
Stay tuned for more videos!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Practical Machinist is the largest and most engaged metalworking community across the web. With more than 170,000 registered members and 320,000+ social media followers, Practical Machinist is the easiest way to learn new techniques, get answers quickly, and discuss common challenges with other industry professionals. Visit Practical Machinist today to join the community and start connecting with your peers.
Become a Practical Machinist member (https://www.practicalmachinist.com/)
Like us on Facebook (https://www.facebook.com/PracticalMachinist)
Follow us on Instagram (https://www.instagram.com/practicalmachinist/)
Follow us on Twitter (https://twitter.com/prac_machinist)
Connect with us on LinkedIn (https://www.linkedin.com/company/practical-machinist)
#metalworking #shopmanagement #machineshoptalk
Видео MACHINE SHOP TALK - Episode #30: Dealing With a New Engineer / Should You Hammer a Part in the Vise? канала PracticalMachinist
When difficulties between machinists and engineers arise, there are different ways approach the situation. Ian walks through a couple of the different options and even offers his own opinion. Let us know in the comments any similar experiences you have had, and how it was solved or what you learned from it. You can grab the forum thread here: https://www.practicalmachinist.com/vb/general/convincing-new-engineer-his-idea-waste-time-392857/.
The second forum discussion may seem simple but it drove quite the conversation. The big debate: Do you hammer your part into the vise? There are many machinists who find this to be standard practice, and many machinists who would argue this to be terrible practice. What do you think? Let us know in the comments section below! Grab the second forum thread here: https://www.practicalmachinist.com/vb/general/dead-blow-hammers-parts-vises-333861/
Are you a member on the Practical Machinist forum? If you are, share a thread you think Ian should discuss by dropping the link in the comments!
Stay tuned for more videos!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Practical Machinist is the largest and most engaged metalworking community across the web. With more than 170,000 registered members and 320,000+ social media followers, Practical Machinist is the easiest way to learn new techniques, get answers quickly, and discuss common challenges with other industry professionals. Visit Practical Machinist today to join the community and start connecting with your peers.
Become a Practical Machinist member (https://www.practicalmachinist.com/)
Like us on Facebook (https://www.facebook.com/PracticalMachinist)
Follow us on Instagram (https://www.instagram.com/practicalmachinist/)
Follow us on Twitter (https://twitter.com/prac_machinist)
Connect with us on LinkedIn (https://www.linkedin.com/company/practical-machinist)
#metalworking #shopmanagement #machineshoptalk
Видео MACHINE SHOP TALK - Episode #30: Dealing With a New Engineer / Should You Hammer a Part in the Vise? канала PracticalMachinist
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![MACHINE SHOP TALK - Episode #26: Things to Consider Before Quoting a Job](https://i.ytimg.com/vi/vaOl5pFFe_s/default.jpg)
![Machine Shop Tours: Aero Marine Biotech](https://i.ytimg.com/vi/x2lSvShCyKk/default.jpg)
![Machine Shop Tours: The Machining Center](https://i.ytimg.com/vi/mDsnE-tvutY/default.jpg)
![MACHINE SHOP TALK - Episode #31: Acceptable Shop Behavior / How to Know When it's Time to Move On?](https://i.ytimg.com/vi/6BgDjeUajm4/default.jpg)
![Machine Shop Tours: Vintage Machinery](https://i.ytimg.com/vi/yWqeZHXkYCQ/default.jpg)
![Machine Shop Tours: P&G Technologies, Inc](https://i.ytimg.com/vi/gxOUstOh8aU/default.jpg)
![](https://i.ytimg.com/vi/DN66o9GAm34/default.jpg)
![MACHINE SHOP TALK - Episode #6: How to use an edge finder](https://i.ytimg.com/vi/jmhBsZOYQbQ/default.jpg)
![Surface Finishing Contractor Ruins Metal Components | Machine Shop Talk Ep 54](https://i.ytimg.com/vi/7eXYmYoPlRc/default.jpg)
![How to Respond To a Stubborn Boss | Machine Shop Talk Ep 56](https://i.ytimg.com/vi/cMfYEYnZCQI/default.jpg)
![Machine Shop Tours: Abom79](https://i.ytimg.com/vi/TA0z8ndwERA/default.jpg)
![Ordered $30K Worth of Materials…Customer Canceled | Machine Shop Talk Ep 53](https://i.ytimg.com/vi/c9U2iKNxrRc/default.jpg)
![Make a simple metal lathe or mill alignment hammer - knocker](https://i.ytimg.com/vi/lvln3Q1_ohk/default.jpg)
![MACHINE SHOP TALK - Episode#28: Snapped at a Client? | Double-quote or Walk Away | 80/20 Rule Debate](https://i.ytimg.com/vi/HymcqtFe76E/default.jpg)
![MACHINE SHOP TALK - Episode #27: A Day in the Life of A Machinist](https://i.ytimg.com/vi/3oYdu-SW5Qw/default.jpg)
![9 Lines of Code Every CNC Machinist Needs To Know! - Haas Automation Tip of the Day](https://i.ytimg.com/vi/hJM8pnUazpk/default.jpg)
![TDC Manufacturing Shop Tour | Die shop turned CNC](https://i.ytimg.com/vi/gFrHiejD8Tc/default.jpg)
![How Formerly Incarcerated are Building the Workforce | Breaking The Cycle](https://i.ytimg.com/vi/efk5LSAAIrY/default.jpg)
![Making a Machinists Jack featuring Craig's Workshop](https://i.ytimg.com/vi/k3yWIkkP8w8/default.jpg)
![Tool Time 25 Kurt Vise Tip/Trick](https://i.ytimg.com/vi/wijVBuGQa28/default.jpg)