Cold Steel Rajah generations (Rajah 1 and Rajah 2
I have every Cold Steel Rajah generation, except the Rajah black out, so I wanted to go over some of their differences and lack there of. The steels used are Aus 8, CTS BD1 and Aus 10A. I mess up in this video and say Aus10A rusts easily, it does not; I meant to say Aus 8.
Видео Cold Steel Rajah generations (Rajah 1 and Rajah 2 канала Totes Malotes
Видео Cold Steel Rajah generations (Rajah 1 and Rajah 2 канала Totes Malotes
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Best of 2023: knife design, steel and handle material.](https://i.ytimg.com/vi/arSR96WaEZs/default.jpg)
![Finished Vanadis 4 Extra knife, handle steps and future project](https://i.ytimg.com/vi/ECTfpRSztfQ/default.jpg)
![Todd Cutler Scottish Dirk good and bad](https://i.ytimg.com/vi/IRQFVrOG8T4/default.jpg)
![$350 Danner Acadia and $100 Danner Rat Temperate are basically the same boot](https://i.ytimg.com/vi/UgRdKLVFnIA/default.jpg)
![Spyderco H2 crevice corrosion test results.](https://i.ytimg.com/vi/_s2BMvyzHOU/default.jpg)
![80crv2 knife, one year of use](https://i.ytimg.com/vi/T_wcU4T_iH4/default.jpg)
![The knives I’ve made and the steps I take to make one](https://i.ytimg.com/vi/phmis4kzDoQ/default.jpg)
![New design in Vanadis 4 Extra](https://i.ytimg.com/vi/HEfw2Kv0EF8/default.jpg)
![Upcoming projects: K390 and Magnacut](https://i.ytimg.com/vi/4bBDqDS_zQY/default.jpg)
![Argentine Lignum Vitae changes colors](https://i.ytimg.com/vi/tWMJDxubSLI/default.jpg)
![Best button setup on a flashlight Thrunite TN12 Pro (warning: flashing lights)](https://i.ytimg.com/vi/IGVbM1ASrjg/default.jpg)
![Beginning galvanic corrosion test of LC200N vs Vanax](https://i.ytimg.com/vi/s0GckZOxw80/default.jpg)
![Magnacut knife design evolution](https://i.ytimg.com/vi/9cABL__QHxU/default.jpg)
![First time chopping with my Magnacut handmade knife](https://i.ytimg.com/vi/011gKbeStzM/default.jpg)
![I present to you the double reverse Tanto in CPM 3V](https://i.ytimg.com/vi/_NsrSHazbME/default.jpg)
![I finished my Magnacut knife that has an evil eye](https://i.ytimg.com/vi/Y-HHm1mMqkE/default.jpg)
![Comparison of Cold Steel Talwar to Espada](https://i.ytimg.com/vi/WHme2Tav0Rw/default.jpg)
![I’m ending the Spyderco H1 vs H2 galvanic corrosion test](https://i.ytimg.com/vi/HcmEhX8UrLM/default.jpg)
![A couple upcoming designs: Magnacut and double edged Tanto in 3V](https://i.ytimg.com/vi/mLxrEKSpuWY/default.jpg)
![CPM 3V vs 80crv2 same design](https://i.ytimg.com/vi/c8ZYS6_3mks/default.jpg)
![Spyderco H2 vs H1 Sisal Rope Cut Test](https://i.ytimg.com/vi/SBGUAPoSZIs/default.jpg)