New Workflow for Phantom 4 RTK Base Station

This workflow explains how to use the Phantom 4 RTK and D-RTK2 Base Station simultaneously to collect and process survey grade data.

Mission Planning in the P4-RTK:
https://www.youtube.com/watch?v=7cQIrpEglLY&t=12s
https://www.aerotas.com/creating-flight-paths-phantom-4-rtk
FAQ:

What has changed between when the P4RTK launched and this method?

The hardware and software produced by DJI as part of the Phantom 4 RTK and D-RTK-2 base station is essentially unchanged from when it was initially launched. However, our testing has shown this to be a more reliable workflow than any that we have previously published.

Can I still do PPK processing?

Yes, collecting data with this method does not prevent you in any way from PPK processing your data as well. In fact, that is part of what makes this a more reliable workflow, as it can potentially “fall-back” to PPK processing mode should there be any issues with the in-flight RTK processing.

Can I use network corrections (NTRIP via 4G dongle)?

While it is possible to use the DJI 4G dongle attachment to stream network corrections to the Phantom 4 RTK, we do not recommend this workflow, because we have found it to be too complex and unreliable in the field. Adding numerous sources of cellular connectivity and account logins creates numerous possible failure modes, resulting in a less reliable workflow. If however, you are already successfully using a workflow with 4G network corrections, feel free to continue doing so, as you can still post-process using this workflow.

Why do I still need ground control points?

DJI’s base station does not calculate the correct ground point when used multiple times and occupying the same point. Further, even when occupying a “known point” with the DJI base station, the poor construction of the tripod, and lack of support for datums other than WGS84 render this workflow inoperable for most surveyors. Further, if there is a known point on the ground, it is simpler to just mark it and use it as a GCP in this workflow than introduce another possible source of error to the overall project.

Do I still need checkpoints?

Checkpoints are highly recommended, even though they are not strictly required by this workflow.

How can I ensure that a project processed accurately?

Utilizing independent checkpoints is the only way to reliably measure accuracy on a project produced with this workflow. This methodology is endorsed by the American Society for Photogrammetry and Remote Sensing (ASPRS) and is laid out in the Positional Accuracy for Geospatial Data standards document.

Do I need to use Aerotas to process my data?

Aerotas provides the highest quality data processing services, performed by trained and experienced photogrammetry professionals. However, there is nothing in this workflow that is proprietary to Aerotas, and experienced photogrammetrists should be able to follow this workflow.

How reliable is this workflow?

This workflow is designed to be as robust and reliable as possible through the most challenging of real-world scenarios. It does not require a live internet connection of any type while at the job site, and has minimal reliance on radio signals that may be interrupted during the flight. The only important radio link that must be maintained is that between the controller and the aircraft, as that is how RTK correction data is streamed and processed so it can be encoded onto the photos.

Can I get support for this workflow?

Aerotas provides support for this workflow free of charge to all of our data processing clients, however we cannot offer free support on this workflow to the general public. To work with Aerotas, contact us at info@aerotas.com, or request a quote for one of your projects at aerotas.com/quote.

Видео New Workflow for Phantom 4 RTK Base Station канала Aerotas