PAANO GUMAWA NG SHOE CABINET // DIY SHOE CABINET WITH UMBRELLA STORAGE / HOW TO BUILD A SHOE CABINET

SHOE CABINET WITH UMBRELLA STORAGE

MATERIALS USED:

* 2 plys of 3/4 Marine Plywood
* 1 ply of 1/4 ordinary plywood
* 1 pc of 1.5”x2”x12’ kiln dry wood timber
* 2”x3”x20” kiln dry wood timber ( for the leg part)
* 8 pcs of liston wood 8 feet long
* 1” finishing nails
* 1.5” and 1” black screw for wood
* wood glue
* sandpaper o liha ( 150 grit, 220 grit, 400 grit)
* 1 liter of water based davies acrylic wood varnish
* 1 liter of water based davies paint wood primer
* 1 liter of water based davies black enamel paint
* you also need a few parts of water based davies white enamel paint to be mix with the black paint to achieve a dark gray finish.
* you also need a few parts of lampblack paint to be mix with the black paint to achieve a satin finish
* 1 pc 1” paint brush
* 1 pc 3” paint brush
* 2 pcs of 4” paint rollers
* 1 small paint tray
* 1” masking tape
* a pair of putty knife
* 1/4 liter of bosny wall putty
* 1 pair of 14” drawer slide (3 fold ball bearing type)
* 6 pcs of aluminium alloy gold cabinet door knob
* 3 pairs of “full overlay” soft close concealed hinge
* 2 pairs of “half overlay soft close concealed hinge
* 4 pcs of “self adhesive” leg pads

Note:
Not all Plywood is use on this project. There are still remnants left.
The dark grey paint which I mix by myself is optional. But if you can find a dark grey satin finish paint that is already mixed, that would be much better.

If you have more queries, please do not hesitate to write it down in the comment section. I would be more than happy to answer all your questions.
Any suggestions is also welcome hence this will help me improve my future projects.

Please do not forget to like and subscribe on my channel:

Thank you for watching

Видео PAANO GUMAWA NG SHOE CABINET // DIY SHOE CABINET WITH UMBRELLA STORAGE / HOW TO BUILD A SHOE CABINET канала Ace Winfield Loyola