From filler through slurry to latex paint
What is the procedure for preparing paint for filler tests in our laboratory? Using the example of nepheline syenite, we briefly show the process from determining the oil absorption, through the preparation of formulation and slurry, to the preparation of the paint and its tests.
Видео From filler through slurry to latex paint канала Spektrochem Paint Technical Center
Видео From filler through slurry to latex paint канала Spektrochem Paint Technical Center
Показать
Комментарии отсутствуют
Информация о видео
10 августа 2020 г. 16:00:09
00:02:27
Другие видео канала
Studies of raw materials for DIY water-borne paint for woodPrint resistance ASTM D2064 [Paint Testing]Case studies: Lowering the MFFT with renewable coalescing agentScrub resistance of latex paints TT-P-29K [Paint Testing]Solids in TiO2 slurry ASTM D3926 [Paint Testing]Brookfield viscosity ASTM D2196 [Paint Testing]Case studies: Opacity of TiO2, ZnO, kaolin and calcium carbonateWater permeability EN 1062-3 [Paint Testing]Paint lightfastness ASTM D6695 [Paint Testing]Quality Control of POLYMER DISPERSIONS for Latex PaintsDirt pick-up UNI 10792 [Paint Testing]Case studies: Elimination of mudcracking by MFC (microfibrillated cellulose)EC SHORT COURSE: BASICS OF ARCHITECTURAL COATINGS (ON-LINE)Low Temperature Coalescence ASTM D7306 [Paint Testing]E-SPERSE® FT 600 -- freeze-thaw ADDITIVE for LATEX PAINTS [part 1]PAINT ICI VISCOSITY ASTM D4287Jack O'Lantern paint formulationPAINT SPATTERING RESISTANCE ASTM D4707pH of adhesives EN 1245 [Adhesives Testing]Drying test ISO 9117-5 modified Bandow Wolff [Paint Testing]