Загрузка страницы

program 3dr Telemetry with usb to serial

A alternative way of programming ,loading firmware to your
Telemetry- kit TTL 3DRobotics 3DR Radio Telemetry Kit 433Mhz Module directly off a usb to serial adapter

May or may not fix telemetry no link ,blinking greed light / No solid green light problem

the best way would probably to remove the telemetry connection from apm side and skin all four wires. so you only need to tape them up after.
other option is to attach on the daughter board pad 2 and pad 4 for tx and rx...
the way i did it in the video is sorta dumb and you run the risk of shorting positive to rx,then its game over..
Look for a usb to ttl that has the cp2102 chip. It is the same chip that is inside the
ground unit and works with wndows 7 8 10.. ..

firmware
http://firmware.diydrones.com/SiK/stable/
Right click on radio~hm_trp.ihx and choose Save As
link.
3DR Radio Configuration Tool
http://ardupilot.com/downloads/?did=89
Support
https://www.paypal.me/bangs6996

If I help you in the comments don't ever feel obligated to donate.
all money will go towards future video's
-
-
-

Видео program 3dr Telemetry with usb to serial канала ModItBetter
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
4 февраля 2016 г. 7:19:38
00:07:37
Яндекс.Метрика