4-POINT SADDLE ⏲️ THE CLEANEST WAY TO CLEAR BIG OBSTACLES👇 #CONDUIT #EMT #4POINTSADDLE #electrician

LEARN HOW TO MAKE A 4-POINT SADDLE ON EMT CONDUIT LIKE A PRO! 💪

THE 4-POINT SADDLE IS USED WHEN YOU NEED TO CLEAR A WIDER OBSTACLE THAN A 3-POINT CAN HANDLE — LIKE LARGE PIPES, BEAMS, OR BOXES. THIS METHOD CREATES A LONGER, SMOOTHER RISE AND RETURN WITH FOUR PRECISE BENDS. ⚡️

STEP-BY-STEP:
1️⃣ DETERMINE THE HEIGHT (H) AND WIDTH OF YOUR OBSTACLE.
2️⃣ SELECT YOUR BEND ANGLES — COMMON SETUP: 22.5° – 45° – 45° – 22.5°.
3️⃣ CALCULATE YOUR DISTANCE BETWEEN BENDS:
• DISTANCE BETWEEN THE FIRST TWO = H ÷ TAN(22.5°)
• DISTANCE BETWEEN THE MIDDLE (45°) BENDS DEPENDS ON THE OBSTACLE WIDTH.
4️⃣ MARK YOUR FOUR BEND POINTS ON THE CONDUIT IN ORDER.
5️⃣ MAKE YOUR FIRST 22.5° BEND, THEN THE FIRST 45°, FLIP THE CONDUIT AND REPEAT IN REVERSE ORDER.
6️⃣ CHECK ALIGNMENT — ALL BENDS MUST STAY IN THE SAME PLANE.
7️⃣ TEST FIT OVER YOUR OBSTACLE — ADJUST MINOR ANGLES FOR PERFECT CLEARANCE.

THIS 4-POINT SADDLE CREATES A LONG, SMOOTH OFFSET AND LOOKS PROFESSIONAL IN ANY PANEL ROOM, INDUSTRIAL RACK, OR SURFACE RUN. ⚙️

REMEMBER: KEEP CONSISTENT PRESSURE, CHECK YOUR ANGLES WITH A LEVEL, AND ALWAYS VERIFY FIT BEFORE CUTTING.

MASTER THIS TECHNIQUE AND YOUR CONDUIT RUNS WILL LOOK CLEAN, PRECISE, AND BUILT TO LAST. ⚡️🔥

Видео 4-POINT SADDLE ⏲️ THE CLEANEST WAY TO CLEAR BIG OBSTACLES👇 #CONDUIT #EMT #4POINTSADDLE #electrician канала TRADES SKILLS CALIFORNIA