Prevents copper ring or jewelry turning fingers green or oxides

Firstly i would like to apologize for my poor English, as i am too lazy to create a script. I decided to do this video was due to fact that there is not much information or solution online for this problem, when google most of them recommended putting a coating of nail polish, and it need to reapply it after a few days. So i came up with a much more permanent method.

Do note try this method at your own risk, i am not responsible for your jewelry

Here's a better illustration:

Items Needed:

.Small dish
.Rag/cloth
.WD40
.Brasso or any copper polish
.Rust-oleum Clear Enamel Spray

Methods:

1. Spray WD-40 to purge out access moisture or remove stubborn stains (soak about 10-20 Mins)(longer for really stubborn stains), wipe it off with the rag/cloth

2. Soak in Brasso or any copper polish for about 30 - 40 mins, until the green sludge came out and than wipe it off with a rag/cloth

3. Lastly spray a thin layer of Rust-oleum Crystal Clear Enamel all over the ring, do take note to spray it a a certain distances for a even coating, also do not spray too thick as it might affect the shininess of your jewelry.

4. Give it about half a day to one day for it to dry.

I been wearing this ring for one whole day and even wash my hand with it with no issues, also no long finger turning green.

Usually my ring oxides in about 10-20 mins after i worn it, now after applying this coating, it still the same color even if there's moisture.

Hope this work for you too!

Видео Prevents copper ring or jewelry turning fingers green or oxides канала Austin'S