GEPRC GEP KHX5 ELEGANT

This will be part one of a build including how to set up Smart audio and GPS with step by step instructions for new pilots.

GEPRC GEP KHX5 ELEGANT https://www.banggood.com/GEPRC-GEP-KHX4-KHX5-KHX6-Elegant-200mm-230mm-260mm-Wheelbase-Carbon-Fiber-FPV-Racing-Frame-Kit-p-1288120.html?rmmds=searchA02817649204201406M5
Also available as a BNF https://www.banggood.com/GEPRC-GEP-KHX5-Elegant-230mm-RC-FPV-Racing-Drone-F4-5_8G-48CH-40A-BLHeli_S-Dshot600-PNPBNF-p-1310424.html?rmmds=searchA02817649204201406M5
Features
The battery is located above the arm, which shall be in the form of a symmetrical distribution. The center is in the middle of the whole machine. When flying, the pilot can have good hand feeling. The motor output is more balanced and more high efficient; the design lowers the risk of damaging the battery when being collapsed.
Camera and the video recorder use #7075 aviation aluminum alloy, which is processed in a high accurate way (high accuracy CNC), making the whole machine good-looking and solid.
The one-in-all high accurate CNC arm is made of 3K pure carbon fiber plates, whose structure is simple but solid. The arm is quite narrow (14mm) so the wind resistance will be smaller.
The front part and rear part are supported by aluminum pieces, while the side board connects with the aluminum parts, making the structure solid and firm. Besides, such a structure can efficiently protect the electronic equipment inside the machine. The LED rear light board is fixed by a square aluminum post, where a buzzer for seeking the machine is available. Therefore, it is quite practical and good-looking.
By True X structure, it is suitable for competition and freestyle fly.
There are six 2812 rear lights and a bb sound. When flying, the lights are cool and the flight is easy to be found because of the buzzer.
The motor rack has a stand-out design, which can protect the motor when there is a collision. There are spacing holes for motor wire, which will make the wiring easier and more convenient; the motor wires are tightly close to the arm bottom, which will not adversely affect the look but better protect the motor wires and ESC (electronic speed controller).
The 2mm bottom board can well guarantee the flight control; also, it can protect the components from being damaged when collapsing and landing.
YFS screws (strength: grade 12.9) can ensure a good hardness.
One PDB distribution board with BEC (5/12v output) is available, integrating with XT60.

Видео GEPRC GEP KHX5 ELEGANT канала George Cooper