Terrco WoodCarver - K-Star
www.terrco.com - The K-Star is the start of our industrial duplicating woodcarvers. The router found on our smaller machines has been replaced with a 1/2 HP industrial motor on the K-Star. The K-Star can make two copies at once. The size capacity is anything with a 10 inch diameter, the K-Star is available in lengths of 24, 48 and 60 inches depending on your need. There is a table top option that make relief carving possible on the K-Star.
Видео Terrco WoodCarver - K-Star канала TerrcoFPV
Видео Terrco WoodCarver - K-Star канала TerrcoFPV
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
TERRCO INC THIN-SET REMOVAL.MPGInstalling Universal Tool Plates with Carbide SlicersTERRCO INC. Model 7500Terrco Inc: SPEED SHIFT SYSTEMTerrco WoodCarvers - F-200TERRCO INC. Model 701 STERRCO EDGERTerrco WoodCarvers - MARLINTerrco WoodCarvers - T-110TERRCO INC. Dyeing and Polishing Concrete DemoTERRCO INC. Model 6200Terrco WoodCarvers - NORTHSTARTerrco Inc Carpet Glue RemovalModel 6200 with AGGRESSIVE Thick Mil Epoxy and Trowel Down Removal ToolingTerrco Inc. Removing Epoxy using PCD'sTERRCO INC: DYEING A TERRCO LOGOTerrco Inc 16 Grit B.E.D's on a 701-S