Japanese Chisel Setup - Part 1 of 3 - Setting the Hoop
Many (though not all) Japanese chisels arrive to their new owner with a hoop pressed on the end of their handle, though not fully set. In this video we discuss the basics of setting the chisel hoop.
If you're interested in picking up the equipment to do this yourself, the hoop setting tool can be found here:
https://japanesetools.com.au/products/chisel-hoop-fitter
Our full range of hammers can be found here (we used a 590g in this video):
https://japanesetools.com.au/collections/hammers
And our chisel range can be found here:
https://japanesetools.com.au/collections/chisels
If you haver any questions about this process, please post a comment below, email info@japanesetools.com.au or call us on (02) 9527 3870.
Видео Japanese Chisel Setup - Part 1 of 3 - Setting the Hoop канала Japanese Tools Australia
If you're interested in picking up the equipment to do this yourself, the hoop setting tool can be found here:
https://japanesetools.com.au/products/chisel-hoop-fitter
Our full range of hammers can be found here (we used a 590g in this video):
https://japanesetools.com.au/collections/hammers
And our chisel range can be found here:
https://japanesetools.com.au/collections/chisels
If you haver any questions about this process, please post a comment below, email info@japanesetools.com.au or call us on (02) 9527 3870.
Видео Japanese Chisel Setup - Part 1 of 3 - Setting the Hoop канала Japanese Tools Australia
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Waterstones - Some of the most FAQs18mm HSS Bowl and Spoon GougeCarving Techniques for BeginnersThe Pleasure of the Japanese Planejapanese pry bar pulling nailThe Gotoku Plane - An OverviewJTA hosts Hiroshi Yamaguchi in 2019Japanese tools in Australian furniture making - a discussion with MatterMini Ebony PlanesChristian visits the Shinwa Sashigane and ruler factory in SanjoAn Introduction to Anaya Nomi and Tsuki NomiToyo Steel Smallest to BiggestPlane Tuning Addendum - TsutsumiIn-depth: The Suehiro Cerax #800 WaterstoneIn-depth: Suehiro's Cerax #6000 WaterstoneNakaya 210mm Dozuki Saw - All the Details!Cutting a Kanawa-tsugi with the Leading HandThe Stiletto Chisel - Sharp, Tough and a Total LookerSetting Up a Japanese Plane for a Chopstick Jig - Just the Very BasicsTuning Flat Bottom Planes for use on Jigs!Japanese Plane Tuning - Part 5 of 5 - Fitting the Chipbreaker